|
[Sponsors] |
![]() |
![]() |
#1 |
New Member
Yu-Jan Wang
Join Date: Aug 2023
Posts: 2
Rep Power: 0 ![]() |
Hi REEF3D Team :
I tried to use SFLOW to make regular wave in a long wave tank currently, but I found the wave would decay in the spatial domain when it was propagating. Before I asked this question, I had tested A 210 to 242. Unfortunately, the problem persists. How can I solve this problem? Best regards, Wang ctrl.txt control.txt messageImage_1704854751415.jpg messageImage_1704854881313.jpg |
|
![]() |
![]() |
![]() |
![]() |
#2 |
Super Moderator
Hans Bihs
Join Date: Jun 2009
Location: Trondheim, Norway
Posts: 396
Rep Power: 18 ![]() |
Hi Yu-Jan,
the problem is that SFLOW does not support a non-uniform mesh and B 2 confuses it a bit - sorry, this probably does not become clear from the documentation, we should update this. In any case, for the control.txt use the following: C 11 6 Still, SFLOW is probably not the best for this task (even though kd is only 0.5), e.g. FNPF would be much better at this. |
|
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
BuoyantBoussinesqSimpleFoam_Facing problem | Mondal131211 | OpenFOAM Running, Solving & CFD | 1 | April 10, 2019 19:41 |
Problem with grid sensitive test cases(shock instability) in SU2.!!! | Vino | SU2 | 2 | November 27, 2014 04:33 |
Test problem for 1D isothermal Euler equations | san_cfd | Main CFD Forum | 4 | September 27, 2012 05:28 |
1D subsonic flow test problem | san_cfd | Main CFD Forum | 0 | March 31, 2011 11:54 |
setup vof test problem | Fang Jin | FLUENT | 1 | June 14, 2005 08:27 |