 |
 |
 |
|
|
|
[Sponsors] | ||||
August 8, 2023, 02:55
|
Floating 2D model suddenly stoped(STUCK)
|
#1 |
|
Member
hithere
Join Date: Jun 2023
Posts: 46
Rep Power: 3  |
hello..
im new to this REEF3D. I simulate a 2D floating body.. first it showed velocities exceeding critical value N 61 and i solve the problem.. now the issue is after running the simulations ,it suddenly stopped... Im using windows 10 ubuntu latest subsystem REEF3D23.03 DIVEMESH 23.03 HYPRE 2.27 EIGEN 3.4 COMPUTER SPEC Processor Intel(R) Xeon(R) CPU E5-2687W v3 @ 3.10GHz, 3101 Mhz, 10 Core(s), 20 Logical Processor(s) Error im attaching here... why REEF3D always showing some error?  what is the reason for this? im attaching control.txt and ctrl.txt here. please help me......... 
|
|
|
|
|
|
August 15, 2023, 13:28
|
|
#2 |
|
Super Moderator
Hans Bihs
Join Date: Jun 2009
Location: Trondheim, Norway
Posts: 403
Rep Power: 19 |
"why REEF3D always showing some error?"
-> the control file just has too many errors. For example with the given floating body mass, the floating body density becomes 3262.5. So the body just sinks to the bottom. Also, why use the C and G options, not clear what the purpose is. |
|
|
|
|
|
|
August 16, 2023, 01:23
|
|
#3 | |
|
Member
hithere
Join Date: Jun 2023
Posts: 46
Rep Power: 3 |
Quote:
thank you for your response.. After mooring the issue can be solved? |
||
|
|
|
||
|
August 16, 2023, 05:32
|
|
#4 |
|
Super Moderator
Hans Bihs
Join Date: Jun 2009
Location: Trondheim, Norway
Posts: 403
Rep Power: 19 |
Mooring will not fix the problem, but the correct floating body mass plus a control file clean up.
|
|
|
|
|
|
|
August 16, 2023, 05:54
|
|
#5 | |
|
Member
hithere
Join Date: Jun 2023
Posts: 46
Rep Power: 3 |
Quote:
|
||
|
|
|
||
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| interFoam wave propagation and explosion of Courant number and residuals | ChiaraViola | OpenFOAM Running, Solving & CFD | 1 | June 26, 2019 06:36 |
| Floating Point Error with kOmegaSST Turbulence Model | shipman | OpenFOAM Running, Solving & CFD | 5 | January 4, 2016 09:57 |
| coalChemistryFoam: "Foam::error::printStack(Foam::Ostream&) at ??:?" | musabai | OpenFOAM Running, Solving & CFD | 2 | February 20, 2015 15:07 |
| Overflow Error in Multiphase Modelling with Two Continuous Fluids | ashtonJ | CFX | 6 | August 11, 2014 15:32 |
| Is it possible to model natural convection in a 2D horizontal model in fluent | caitoc | FLUENT | 1 | May 5, 2014 14:32 |
Linear Mode
