Updating Reef3D&DiveMESH

BaranOz · August 11, 2022, 05:55

Hi everyone,
Is there any way to update the older version of REEF3D and DiveMESH with the newer versions easily? (Or should we remove the older versions and install the new ones from scratch?)
Thanks in advance.
Baran

kamath · August 11, 2022, 06:45

Hi Baran,

If you have downloaded the sourcecodes using the console command
git clone...

then to update to the latest version of the branch you have would be easily accomplished using

git pull

when you are in the REEF3D/ DiveMESH folder.

And then remember to use
make clean

before compiling the code.

You can follow a similar procedure if you are using the GUI Github Desktop.

But if you simply downloaded a .zip, then you will have to download a new .zip again and run the make command. ( I guess this is "from scratch")

BaranOz · August 11, 2022, 06:51

Okay. Thank you soo much

August 11, 2022, 05:55	Updating Reef3D&DiveMESH	#1
BaranOz New Member Baran Join Date: Apr 2021 Posts: 9 Rep Power: 5	Hi everyone, Is there any way to update the older version of REEF3D and DiveMESH with the newer versions easily? (Or should we remove the older versions and install the new ones from scratch?) Thanks in advance. Baran

August 11, 2022, 06:45		#2
kamath Senior Member Arun Kamath Join Date: Nov 2014 Location: Trondheim, Norway Posts: 265 Rep Power: 13	Hi Baran, If you have downloaded the sourcecodes using the console command git clone... then to update to the latest version of the branch you have would be easily accomplished using git pull when you are in the REEF3D/ DiveMESH folder. And then remember to use make clean before compiling the code. You can follow a similar procedure if you are using the GUI Github Desktop. But if you simply downloaded a .zip, then you will have to download a new .zip again and run the make command. ( I guess this is "from scratch") __________________ Arun X years with REEF3D

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[IHFOAM] The IHFOAM Thread	Phicau	OpenFOAM Community Contributions	392	September 8, 2023 19:10
attachmentPt for floating body at each time step for overInterDyMFoam solver	mahsankhan	OpenFOAM Running, Solving & CFD	0	January 24, 2022 12:13
objects oscillate at high speed causing collapse in Dynamic mesh and overset mesh ca	insane	OpenFOAM Running, Solving & CFD	0	May 17, 2020 23:35
interFoam wave propagation and explosion of Courant number and residuals	ChiaraViola	OpenFOAM Running, Solving & CFD	1	June 26, 2019 06:36
[Workbench] Updating ICEM during DOE leads to incompatibility with Fluent	Gottkanzler	ANSYS Meshing & Geometry	1	June 12, 2019 07:30

August 11, 2022, 06:51		#3
BaranOz New Member Baran Join Date: Apr 2021 Posts: 9 Rep Power: 5	Okay. Thank you soo much