[Felix_Sp]

Hi everyone,


so I tried to create an array of boxes with S 11 in DIVEMesh. When I open up the REEF3D_Solid.vtp in ParaView the surface looks as expected (see first picture). But when I create the solid in the output with P25 in REEF3D, only the rectangular objects created with S 10 are shown (see picture 2). I created a single one just for testing and the half sized ones in DIVEMesh. After starting a simple simulation with this geometry it seems as if the wave is not interacting with the array of boxes (see picture 3 for the solid and picture 4 for the .vtu from P25). My simulation files are attched in the zip-folder.

My question is whether I have to connect this array somehow with the rest of the geometry or how I can use S11 in a correct way.

Thanks for your help in advance!

[valgrinda]

Hi Felix,

yes, I can confirm the problem. I will let you know once the problem is fixed.

[valgrinda]

Hi Felix,

the problem is fixed in the DIVEMesh release candidate.

[Felix_Sp]

Hey,


thanks for the reply and the fix!