Issue in making mesh. Mesh going out of domain

shahidkhan · March 29, 2022, 07:12

I am trying to make a structured mesh in a 2-D plane which I want to extrude into the 3rd dimension to make a 3-D grid.
I am first making a transfinite grid and then trying to run an elliptic solver on it.
But when running an elliptic solver, my mesh is going out of the domain.
If anyone have any idea of how to solve the issue please get back to me.
Near the left corner, the mesh is going out of the domain, while in the right corner it is inside the domain.

Attached you will find my mesh files and the desired mesh which I need.
Please look into it. It will be very helpful to me.

dgarlisch · March 30, 2022, 11:10

Mesh (.pw) files?

You will need to ZIP them before attaching.

shahidkhan · March 31, 2022, 04:47

Quote:

Originally Posted by dgarlisch

Mesh (.pw) files?

You will need to ZIP them before attaching.

Can you please send me your e-mail or any other point of contact through which I can send you files? This is because even when I am zipping the files its size is larger than what is allowed in the forum?

It will be a great help to me.

dgarlisch · March 31, 2022, 13:07

I do not have an upload site.

Please remove everything from the upload file except for the minimal grid entities needed to reproduce the problem.

Create a coarser version of the domain that repeats the problem.

If that is still too large, delete the domain and just upload the cons. I can recreate the dom here.

Otherwise, contact Pointwise support and submit the full file to them for debugging.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
decomposePar problem: Cell 0contains face labels out of range	vaina74	OpenFOAM Pre-Processing	37	July 20, 2020 06:38
Sudden increase the residual of Maxwell's equations	hsezsz	CFX	2	October 13, 2016 07:58
Moving mesh	Niklas Wikstrom (Wikstrom)	OpenFOAM Running, Solving & CFD	122	June 15, 2014 07:20
[swak4Foam] build problem swak4Foam OF 2.2.0	mcathela	OpenFOAM Community Contributions	14	April 23, 2013 14:59
fluent add additional zones for the mesh file	SSL	FLUENT	2	January 26, 2008 12:55

March 30, 2022, 11:10		#2
dgarlisch Senior Member David Garlisch Join Date: Jan 2013 Location: Fidelity Pointwise, Cadence Design Systems (Fort Worth, Texas Office) Posts: 307 Rep Power: 14	Mesh (.pw) files? You will need to ZIP them before attaching.

March 31, 2022, 13:07		#4
dgarlisch Senior Member David Garlisch Join Date: Jan 2013 Location: Fidelity Pointwise, Cadence Design Systems (Fort Worth, Texas Office) Posts: 307 Rep Power: 14	I do not have an upload site. Please remove everything from the upload file except for the minimal grid entities needed to reproduce the problem. Create a coarser version of the domain that repeats the problem. If that is still too large, delete the domain and just upload the cons. I can recreate the dom here. Otherwise, contact Pointwise support and submit the full file to them for debugging.