Pointwise Sudden Slow Down in Generation Time

Spacegirl1923 · January 7, 2019, 17:59

Hello, meshing community! I'm wondering if anyone has experienced a slow down in execution, or solve time using Pointwise? And if you have did you figure out what caused it or how to get around it?

I'm on a Mac (10.11.6) running Pointwise V18.1 R1. I am generating meshes of approximately the same size (cell count) and using the same general geometry I have received from SolidWorks however the time to simply assemble a block or generate a surface mesh has increased 10 fold from a couple of days ago. My machine isn't doing anything else and I can easily see that Pointwise is consuming all of my CPU's. The most recent operation is to assemble a group of domains into a block (not even generate the mesh just assemble it) and it has been sitting on 14% for almost 2 hours. The previous operation was to construct surface meshes for an imported database which took about 30 min, yesterday that would have taken me about 2 min or less...

Any ideas on why it seems to be hanging? Thanks!

RcktMan77 · January 8, 2019, 14:48

I would recommend you first try updating Pointwise to 18.2R1. If the problem persists, then I would recommend you forward this issue to Pointwise's technical support with your customer ID to let them help diagnose the issue--I mean customer support is one of key reasons you purchase a license for commercial software...

January 7, 2019, 17:59	Pointwise Sudden Slow Down in Generation Time	#1
Spacegirl1923 New Member Megan Join Date: Jan 2013 Location: Hampton Roads VA Posts: 13 Rep Power: 13	Hello, meshing community! I'm wondering if anyone has experienced a slow down in execution, or solve time using Pointwise? And if you have did you figure out what caused it or how to get around it? I'm on a Mac (10.11.6) running Pointwise V18.1 R1. I am generating meshes of approximately the same size (cell count) and using the same general geometry I have received from SolidWorks however the time to simply assemble a block or generate a surface mesh has increased 10 fold from a couple of days ago. My machine isn't doing anything else and I can easily see that Pointwise is consuming all of my CPU's. The most recent operation is to assemble a group of domains into a block (not even generate the mesh just assemble it) and it has been sitting on 14% for almost 2 hours. The previous operation was to construct surface meshes for an imported database which took about 30 min, yesterday that would have taken me about 2 min or less... Any ideas on why it seems to be hanging? Thanks!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
bash script for pseudo-parallel usage of reconstructPar	kwardle	OpenFOAM Post-Processing	42	May 8, 2024 00:17
AMI speed performance	danny123	OpenFOAM	21	October 24, 2020 05:13
Inconsistencies in reading .dat file during run time in new injection model	Scram_1	OpenFOAM	0	March 23, 2018 23:29
pimpleDyMFoam computation randomly stops	babapeti	OpenFOAM Running, Solving & CFD	5	January 24, 2018 06:28
High Courant Number @ icoFoam	Artex85	OpenFOAM Running, Solving & CFD	11	February 16, 2017 14:40

January 8, 2019, 14:48		#2
RcktMan77 Senior Member Zach Davis Join Date: Jan 2010 Location: Los Angeles, CA Posts: 101 Rep Power: 16	I would recommend you first try updating Pointwise to 18.2R1. If the problem persists, then I would recommend you forward this issue to Pointwise's technical support with your customer ID to let them help diagnose the issue--I mean customer support is one of key reasons you purchase a license for commercial software...