|
[Sponsors] |
![]() |
![]() |
#1 |
Member
Zeno
Join Date: Sep 2013
Location: Delft, The Netherlands
Posts: 63
Rep Power: 12 ![]() |
Hello,
Can anybody help me obtain a mesh similar to the one attached in the pictures (2D s809 airfoil) ? I am particularly interested in obtaining the same shape of the C boundary (with the convex 'tongues' on the right side of the domain). I have seen something similar could be obtained with the Extrude->Normal command by adjusting the smoothness parameters but I never manage to obtain the convex tongues at the outermost layer of points. Thanks! Z |
|
![]() |
![]() |
![]() |
Tags |
cmesh, extrusion, s809 |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
y+ = 1 boundary layer mesh with snappyHexMesh | Arzed23 | OpenFOAM Running, Solving & CFD | 6 | November 23, 2022 15:15 |
Simple piston movement in cylinder- fluid models | arun1994 | CFX | 4 | July 8, 2016 02:54 |
[mesh manipulation] Importing Multiple Meshes | thomasnwalshiii | OpenFOAM Meshing & Mesh Conversion | 18 | December 19, 2015 18:57 |
[snappyHexMesh] No layers in a small gap | bobburnquist | OpenFOAM Meshing & Mesh Conversion | 6 | August 26, 2015 09:38 |
Very simple moving mesh | Pete | FLUENT | 4 | February 10, 2006 00:12 |