|
[Sponsors] |
September 9, 2013, 09:34 |
Problem Creating Models by joining Quilts..
|
#1 |
New Member
Sulman Aziz
Join Date: May 2012
Posts: 8
Rep Power: 14 |
Hi , I am trying to mesh a geometry imported in Gridgen in .igs format. and i m facing a lot of difficulties.
1. there are multiple edges appeared in geometry against each edge. 2. i followed the tutorial of meshing of DLR-F6 and did it up to quilts. and after that couldn't make solid models. kindly suggest me what to do..? i m stuck here.. with best regards Sulman Aziz |
|
September 10, 2013, 14:13 |
|
#2 |
Senior Member
|
Hi Sulman,
I would suggest to work with layers and simply turn on the layer that contains the surfaces. You might get rid of this problem and also see the tutorial in Gridgen related to Layer Manager. hope this helps |
|
September 15, 2013, 19:40 |
|
#3 |
Senior Member
John Chawner
Join Date: Mar 2009
Location: Fort Worth, Texas, USA
Posts: 275
Rep Power: 18 |
After importing your geometry the first thing to do is to try to form it into a single model (assuming that's all you have). By doing so you'll get rid of the gaps. Then you can optionally assemble quilts so you have a meshing topology that's simpler than the CAD topology.
__________________
John Chawner / jrc@pointwise.com / www.pointwise.com Blog: http://blog.pointwise.com/ on Twitter: @jchawner |
|
September 29, 2013, 02:22 |
|
#4 |
New Member
Sulman Aziz
Join Date: May 2012
Posts: 8
Rep Power: 14 |
Thx Taxalian for your kind reply.. But i was already following that tutorial and working with layers.
Also thx jchawner, I m wrokingout with you suggestion and will let you know.. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Eddy Viscosity Models and Reynolds Stress Models | JuPa | CFX | 1 | August 20, 2013 18:56 |
[ICEM] Creating a prism layer causes problem.. | earth07 | ANSYS Meshing & Geometry | 1 | June 3, 2013 10:28 |
Gambit - meshing over airfoil wrapping (?) problem | JFDC | FLUENT | 1 | July 11, 2011 05:59 |
Reynolds transport, turbulence model, etc | Beginner | Main CFD Forum | 1 | January 7, 2009 05:36 |
Problem in creating .geo file | SHABAH | CFX | 13 | April 25, 2001 02:22 |