Solidification X Compatible Phoenics Version

November 14, 2002, 09:57

I bought a PDR/Cham NA/9 (Phoenics Demonstration Report) titled: "A fixed grid numerical methodology for phase change problems involving mushy region and convection in the melt". This PDR was run in the Phoenics-84 version 1.0 on April 1986. I reproduced the Q1 and Ground files and run in the Phoenics PVR version 3.3. The results are not similar. Is there some essential difference or incompatibility in those versions? P.S.: I can send the Q1 and Ground files or more explanation about the problem.

Thanks

November 23, 2002, 13:37

I think there are an compatible problem between the PHOENICS VR version and Dos Version, you can close the VR and run the program.

December 6, 2002, 14:02

I am running the program with VR closed, just with DOS version and the convergence isn't reached too. Is there some difference in the default's versions?

November 14, 2002, 09:57	Solidification X Compatible Phoenics Version	#1
Henrique Argentieri Guest Posts: n/a	I bought a PDR/Cham NA/9 (Phoenics Demonstration Report) titled: "A fixed grid numerical methodology for phase change problems involving mushy region and convection in the melt". This PDR was run in the Phoenics-84 version 1.0 on April 1986. I reproduced the Q1 and Ground files and run in the Phoenics PVR version 3.3. The results are not similar. Is there some essential difference or incompatibility in those versions? P.S.: I can send the Q1 and Ground files or more explanation about the problem. Thanks

November 23, 2002, 13:37	Re: Solidification X Compatible Phoenics Version	#2
H.P.LIU Guest Posts: n/a	I think there are an compatible problem between the PHOENICS VR version and Dos Version, you can close the VR and run the program.

December 6, 2002, 14:02	Re: Solidification X Compatible Phoenics Version	#3
Argentieri Guest Posts: n/a	I am running the program with VR closed, just with DOS version and the convergence isn't reached too. Is there some difference in the default's versions?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Files Compatible with GAMBIT	David Banks	Main CFD Forum	0	July 10, 2007 10:15
New version of free postprocessor for PHOENICS	Eugene	Main CFD Forum	0	January 9, 2003 13:02
New version of Phoenics Reader	Eugene	Phoenics	0	December 26, 2002 05:12
New version of Phoenics Reader	Eugene	Phoenics	0	November 13, 2002 03:10
Phoenics- old version	yhlee	Main CFD Forum	0	February 20, 2000 13:39