|
[Sponsors] |
May 11, 2018, 06:36 |
LIT value is 2.3886E7
|
#1 |
New Member
Richard Tam
Join Date: May 2018
Posts: 5
Rep Power: 8 |
So my transient simulation model is an multistorey carpark with a SUN object and 2 winds at different stages.
For some unknown reasons some of the cells in my model's LIT value keep coming up as 2.3886E7, while ground floor and 1/F is way hotter than 2/F, 3/F and the roof as if the radiation passes through the blockage on 1/F itself. Is there any easy debugging process for Phoenics? I am running these settings: Phoenics -VR/Core Elliptic-Staggered One_phase Temperature KECHEN IMMERSOL (Absorption:1 Scatting:0) |
|
May 14, 2018, 21:31 |
Note to self
|
#2 |
New Member
Richard Tam
Join Date: May 2018
Posts: 5
Rep Power: 8 |
found the problem,
Seems like the reason for that is the grid size is too small, the software failed to recognize the floor slab as a solid cell, thus allowing the radiation to pass through |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
looking for lit. and code for interface tracking | Oliver Reipschläger | Main CFD Forum | 2 | December 10, 1998 14:53 |