[OpenFOAM] ParaView 3.6.1 and my laptop freeze

Fed11 · November 5, 2009, 22:40

When I load ParaView 3.6.1 with paraFoam, for any tutorial case and hit the edit color map option in the display menu, my laptop freezes. I can't even kill the process running (paraview-real) from other machines. The only option is to force the reboot!
I use fedora 11, 64 bit.

Anyone for help please?
Thanks
Nat

olesen · November 6, 2009, 04:10

Quote:

Originally Posted by Fed11

When I load ParaView 3.6.1 with paraFoam, for any tutorial case and hit the edit color map option in the display menu, my laptop freezes. I can't even kill the process running (paraview-real) from other machines. The only option is to force the reboot!
I use fedora 11, 64 bit.

Anyone for help please?

I probably can't help (don't have a laptop, don't have fedora), but the usual culprits are the video driver or the window manager. For example, with certain versions of the nvidia driver we've seen total keyboard/mouse lockup with other software (not paraview/vtk). You should probably look there first. You can also try with a different desktop window manager without any desktop effects (eg, failsafe) and see if that changes things.

lin · November 7, 2009, 04:14

I could confirm this behavior with my HP 6530b laptop, 32bit F11 OS version.

If I remember correctly,updating to F12 or using F10 could avoid the freezing problem,but then you will have other problem with the messy colorbar.

Now I could not find solution to this problem.I give up F11 to F10,at least I do not need to reboot,but I could not get fancy colorbar,now I have to plot with another PC.

Hope somebody could help.

Fed11 · November 7, 2009, 14:39

Mark, Hua
Thanks for your reply. I think I am going to give up on Fedora 11, unless someone gives us a solution to the problem. It's a shame seems to be a good one.

lin · November 7, 2009, 21:31

Hi,Just for information.

I have tried different combinations of qt4.3,qt4.5,paraview 3.4,paraview 3.6.1,F10,F11,F12 on my hp 6530b laptop,none of the combination is perfect.But with my previous hp 6710b laptop,it's good.

Now I guess the problem is related to different graphic card,though both are from Intel.

Since I have used Fedora for some time thus am reluctant to move to another OS. Also I guess I will have similiar problem with other linux distro because the Intel graphic driver is open.

Please report back if you resolve this problem with other method,or using other OS.

franzisko · November 17, 2009, 06:19

have u tried vesa drivers?
in section devices of /etc/X11/xorg.conf put
Driver "Vesa"
f.

pcaron · November 17, 2009, 16:29

Dear all, almost same problems here:

I'm using Ubuntu 9.10 64 bit, OF 1.6 with vtkPOpenFOAMReader. My hardware: Laptop HP, Intel Core 2 Duo, video Intel GME965.

I can open a large mesh (without results yet), but when I tried to do a cut of the mesh, the system freezes. The only thing I can do is reboot or "Alt+PrntScreen+R->E->I->S->U->B".

Previously, I had the same video problems with Ubuntu 9.04, I thought 9.10 will solve my problems, but not.

The Intel driver is 2.9.0, and kernel is 2.9.30,

Any ideas? Is this a driver problem or paraviews/OF problem?

Regards

Pablo

Fed11 · November 17, 2009, 23:24

Quote:

Originally Posted by lin

Hi,Just for information.

I have tried different combinations of qt4.3,qt4.5,paraview 3.4,paraview 3.6.1,F10,F11,F12 on my hp 6530b laptop,none of the combination is perfect.But with my previous hp 6710b laptop,it's good.

Now I guess the problem is related to different graphic card,though both are from Intel.

Since I have used Fedora for some time thus am reluctant to move to another OS. Also I guess I will have similiar problem with other linux distro because the Intel graphic driver is open.

Please report back if you resolve this problem with other method,or using other OS.

Hi Lin,
I gave up on fedora and installed the new Opensuse 11.2 (which seems really cool). My previous problem seems to be resolved. I ll keep my fingers crossed!
Nat

lin · November 18, 2009, 04:47

I have tested "vesa" drivers on Fedora 10. It also solve my problem. But with "vesa" driver I could only get 1024x768 resolution,which is not good. The default is 1280x800.

pcaron · November 18, 2009, 09:03

Quote:

Originally Posted by Fed11

Hi Lin,
I gave up on fedora and installed the new Opensuse 11.2 (which seems really cool). My previous problem seems to be resolved. I ll keep my fingers crossed!
Nat

Dear Fed11

I'll give it a try to Opensuse this weekend. But my question is: What's the difference with the other OS? Because, if this is a kernel problem we just need to compile the same kernel version (Ubuntu 9.10 use 2.6.31-5 and Opensuse 11.2 use 2.6.31.5). The kernel's stable version in www.kernel.org is 2.6.31.6. Or, if the problem is the video driver (I have an Intel GME965, in Ubuntu 9.10 the driver's version is 2.9.0) we need to compile the Intel video driver.

I don't understand what's the real problem. I'll try to compile the kernel or driver before reinstall the OS.

Regards

Pablo

lin · November 20, 2009, 04:39

I haved tried F12 today.paraview does not freeze the system,just as F10. But I still get blurred colorbar.

pcaron · November 24, 2009, 12:00

Hello everybody!

Last weekend I installed OpenSUSE 11.2. About the video driver's version, OpenSUSE use's intel video driver 2.9.1, this is the last version available.

I was very happy, until today...My laptop freezes again

.

But now I have more details about when it happens. The system freezes when I try to see some part with opacity. Just load the mesh, change the opacity to 0.5, then the system hangs up.

I'm not using any desktop effect.

I would appreciate any help.

Regards.

Pablo

juliuslein · February 11, 2010, 07:27

Hello together,

on my laptop occurs exactly the same problem. Without the ATI driver everything (in ParaView / ParaFoam) works fine, but 3D Acceleration is quite poor and multimonitoring is complicated as well. The point is that I'm not keen to use the Mesa or Vesa driver...

Any solutions so far? Isn't there some kind of special mode for paraview that improves the openGL compatibility? Any ideas?

Thanks, Julius

pcaron · February 11, 2010, 08:42

Julius,

I couldn't find a solution yet. But I'm almost sure that my problem is the Intel video driver. I've used openSuse 11.2 since November. Everything works fine but transparency feature. If I try to select transparency the laptop freezes in a few seconds. So, I've not used transparency since November

As I understand you aren't using the driver provided by ATI. Why? I installed several machines with nvidia and the drivers, and Paraview, worked fine.

Regards.

Pablo

juliuslein · February 11, 2010, 09:47

Pablo,

I guess that my explanation was a bit poor. Using the ATI (fglrx) driver leads to the mentioned problems. Editing color ranges is impossible. When I'm using the opensource driver (VESA or MESA) instead the errors do not occurr but rendering is significantly slower. Dual-View or multi-monitoring also is not that easy with these drivers...

Any ideas? Thanks for your help,

Regards, Julius

pcaron · February 11, 2010, 10:42

Julius,

I'm sorry, but I don't have experience with ATI hardware. I installed Nvidia using both the ubuntu driver and the one downloaded with envy soft. envy is a program to download the last driver available directly from nvidia or ATI. I used a few times with good results.

I'm sorry I can't help you more...

Regards

Pablo

November 5, 2009, 22:40	ParaView 3.6.1 and my laptop freeze	#1
Fed11 New Member Nat Join Date: Oct 2009 Posts: 10 Rep Power: 17	When I load ParaView 3.6.1 with paraFoam, for any tutorial case and hit the edit color map option in the display menu, my laptop freezes. I can't even kill the process running (paraview-real) from other machines. The only option is to force the reboot! I use fedora 11, 64 bit. Anyone for help please? Thanks Nat

November 17, 2009, 06:19	vesa	#6
franzisko New Member Francesco Join Date: Jul 2009 Posts: 13 Rep Power: 17	have u tried vesa drivers? in section devices of /etc/X11/xorg.conf put Driver "Vesa" f.

November 17, 2009, 16:29	Ubuntu 9.10 64bit same problem	#7
pcaron Member Pablo Caron Join Date: Nov 2009 Location: Buenos Aires, Argentina Posts: 75 Rep Power: 17	Dear all, almost same problems here: I'm using Ubuntu 9.10 64 bit, OF 1.6 with vtkPOpenFOAMReader. My hardware: Laptop HP, Intel Core 2 Duo, video Intel GME965. I can open a large mesh (without results yet), but when I tried to do a cut of the mesh, the system freezes. The only thing I can do is reboot or "Alt+PrntScreen+R->E->I->S->U->B". Previously, I had the same video problems with Ubuntu 9.04, I thought 9.10 will solve my problems, but not. The Intel driver is 2.9.0, and kernel is 2.9.30, Any ideas? Is this a driver problem or paraviews/OF problem? Regards Pablo

November 24, 2009, 12:00	Opensuse 11.2, still problems here	#12
pcaron Member Pablo Caron Join Date: Nov 2009 Location: Buenos Aires, Argentina Posts: 75 Rep Power: 17	Hello everybody! Last weekend I installed OpenSUSE 11.2. About the video driver's version, OpenSUSE use's intel video driver 2.9.1, this is the last version available. I was very happy, until today...My laptop freezes again . But now I have more details about when it happens. The system freezes when I try to see some part with opacity. Just load the mesh, change the opacity to 0.5, then the system hangs up. I'm not using any desktop effect. I would appreciate any help. Regards. Pablo

February 11, 2010, 07:27	Ubuntu 8.04 & ATI Radeon X1400, same problem...	#13
juliuslein New Member Julius Join Date: Mar 2009 Posts: 27 Rep Power: 17	Hello together, on my laptop occurs exactly the same problem. Without the ATI driver everything (in ParaView / ParaFoam) works fine, but 3D Acceleration is quite poor and multimonitoring is complicated as well. The point is that I'm not keen to use the Mesa or Vesa driver... Any solutions so far? Isn't there some kind of special mode for paraview that improves the openGL compatibility? Any ideas? Thanks, Julius

November 7, 2009, 04:14		#3
lin Senior Member Hua Zen Join Date: Mar 2009 Posts: 138 Rep Power: 17	I could confirm this behavior with my HP 6530b laptop, 32bit F11 OS version. If I remember correctly,updating to F12 or using F10 could avoid the freezing problem,but then you will have other problem with the messy colorbar. Now I could not find solution to this problem.I give up F11 to F10,at least I do not need to reboot,but I could not get fancy colorbar,now I have to plot with another PC. Hope somebody could help.

November 7, 2009, 14:39		#4
Fed11 New Member Nat Join Date: Oct 2009 Posts: 10 Rep Power: 17	Mark, Hua Thanks for your reply. I think I am going to give up on Fedora 11, unless someone gives us a solution to the problem. It's a shame seems to be a good one.

November 7, 2009, 21:31		#5
lin Senior Member Hua Zen Join Date: Mar 2009 Posts: 138 Rep Power: 17	Hi,Just for information. I have tried different combinations of qt4.3,qt4.5,paraview 3.4,paraview 3.6.1,F10,F11,F12 on my hp 6530b laptop,none of the combination is perfect.But with my previous hp 6710b laptop,it's good. Now I guess the problem is related to different graphic card,though both are from Intel. Since I have used Fedora for some time thus am reluctant to move to another OS. Also I guess I will have similiar problem with other linux distro because the Intel graphic driver is open. Please report back if you resolve this problem with other method,or using other OS.

November 18, 2009, 04:47		#9
lin Senior Member Hua Zen Join Date: Mar 2009 Posts: 138 Rep Power: 17	I have tested "vesa" drivers on Fedora 10. It also solve my problem. But with "vesa" driver I could only get 1024x768 resolution,which is not good. The default is 1280x800.

November 20, 2009, 04:39		#11
lin Senior Member Hua Zen Join Date: Mar 2009 Posts: 138 Rep Power: 17	I haved tried F12 today.paraview does not freeze the system,just as F10. But I still get blurred colorbar.

February 11, 2010, 08:42		#14
pcaron Member Pablo Caron Join Date: Nov 2009 Location: Buenos Aires, Argentina Posts: 75 Rep Power: 17	Julius, I couldn't find a solution yet. But I'm almost sure that my problem is the Intel video driver. I've used openSuse 11.2 since November. Everything works fine but transparency feature. If I try to select transparency the laptop freezes in a few seconds. So, I've not used transparency since November As I understand you aren't using the driver provided by ATI. Why? I installed several machines with nvidia and the drivers, and Paraview, worked fine. Regards. Pablo

February 11, 2010, 09:47		#15
juliuslein New Member Julius Join Date: Mar 2009 Posts: 27 Rep Power: 17	Pablo, I guess that my explanation was a bit poor. Using the ATI (fglrx) driver leads to the mentioned problems. Editing color ranges is impossible. When I'm using the opensource driver (VESA or MESA) instead the errors do not occurr but rendering is significantly slower. Dual-View or multi-monitoring also is not that easy with these drivers... Any ideas? Thanks for your help, Regards, Julius

February 11, 2010, 10:42		#16
pcaron Member Pablo Caron Join Date: Nov 2009 Location: Buenos Aires, Argentina Posts: 75 Rep Power: 17	Julius, I'm sorry, but I don't have experience with ATI hardware. I installed Nvidia using both the ubuntu driver and the one downloaded with envy soft. envy is a program to download the last driver available directly from nvidia or ATI. I used a few times with good results. I'm sorry I can't help you more... Regards Pablo