[OpenFOAM] Why dosnbt it work on paraview when inputing the results of the case tutorialsstr

dandes · March 22, 2006, 10:12

Neather using ParaFoam<root><filename> nor transfering the results to VTK form the GUI do not have the parameters such as stress or dispplacement choosed to present。 sincerely hoping some one can help to resolve the disaster ! Really appreciate your helping , Thx ^^

eugene · March 22, 2006, 10:41

foamToVTK only converts scalar and vector fields. If you want your stresses to be converted you will first have to decompose then into vectors or scalar components.

dandes · March 22, 2006, 11:47

THX first . But it semms not the point of this problem . I can't find the property of stree or displacement to display even i never convert the results to the VTK format . In other words , i use paraview in Linux system but still no effect . I guess if the stress analysis of segregated finite-element (by the case) is little different to finite-volume , or maybe the results(only sigmaxx,sigmayy,sigmaxy,U) aren't enough for paraview to present it . Or even the results of the analysis are in error . I wish what i explain above is clear for your thinking . Thx again ^^

eugene · March 22, 2006, 12:06

Run:
R <root> <case> //calcs stresses
and then
Rcomponents <root> <case> //makes stress components
and then
foamToVTK <root> <case>

I have no idea what displacement is in this context

March 22, 2006, 10:12	Why dosnbt it work on paraview when inputing the results of the case tutorialsstr	#1
dandes New Member dandes.Huang Join Date: Mar 2009 Posts: 7 Rep Power: 17	Neather using ParaFoam<root><filename> nor transfering the results to VTK form the GUI do not have the parameters such as stress or dispplacement choosed to present。 sincerely hoping some one can help to resolve the disaster ! Really appreciate your helping , Thx ^^

March 22, 2006, 10:41	foamToVTK only converts scalar	#2
eugene Senior Member Eugene de Villiers Join Date: Mar 2009 Posts: 725 Rep Power: 21	foamToVTK only converts scalar and vector fields. If you want your stresses to be converted you will first have to decompose then into vectors or scalar components.

March 22, 2006, 11:47	THX first . But it semms not t	#3
dandes New Member dandes.Huang Join Date: Mar 2009 Posts: 7 Rep Power: 17	THX first . But it semms not the point of this problem . I can't find the property of stree or displacement to display even i never convert the results to the VTK format . In other words , i use paraview in Linux system but still no effect . I guess if the stress analysis of segregated finite-element (by the case) is little different to finite-volume , or maybe the results(only sigmaxx,sigmayy,sigmaxy,U) aren't enough for paraview to present it . Or even the results of the analysis are in error . I wish what i explain above is clear for your thinking . Thx again ^^

March 22, 2006, 12:06	Run: R //calcs	#4
eugene Senior Member Eugene de Villiers Join Date: Mar 2009 Posts: 725 Rep Power: 21	Run: R <root> <case> //calcs stresses and then Rcomponents <root> <case> //makes stress components and then foamToVTK <root> <case> I have no idea what displacement is in this context

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[OpenFOAM] How to view openfoam results in paraview	Marineboy	ParaView	9	June 19, 2019 22:16
[OpenFOAM] ParaView 4.10 and OpenFOAM 2.3.0 Multiregion and decomposed case	romant	ParaView	3	April 7, 2014 16:42
[OpenFOAM] parallel case with paraview	Ingenieur	ParaView	2	August 16, 2013 09:24
UDF to transfer results from one case to the next case	howhs	Fluent UDF and Scheme Programming	4	July 17, 2013 00:31
how to map results from steady state run to tranient case?	phsieh2005	OpenFOAM Running, Solving & CFD	2	November 7, 2010 07:20