[OpenFOAM] Error while postprocessing channelOodles tutorial in OpenFOAM 13

alberto · April 6, 2006, 16:34

While post-processing the channelOodles tutorial case in OpenFOAM 1.3, when I select a time step in ParaView and click on Accept, I get the following error message:

alberto@dimension4400:~/OpenFOAM/alberto-1.3/run/tutorials/channelOodles> paraFoam . channel395
/*---------------------------------------------------------------------------*\
| ========= | |
| \ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \ / O peration | Version: 1.3 |
| \ / A nd | Web: http://www.openfoam.org |
| \/ M anipulation | |
\*---------------------------------------------------------------------------*/

--> FOAM FATAL ERROR : Not implemented

From function void CyclicPointPatchField<patchfield,>::evaluate()
in file /home/dm2/henry/OpenFOAM/OpenFOAM-1.3/src/OpenFOAM/lnInclude/CyclicPointPatchFie ld.C at line 187.

FOAM aborting

/home/alberto/OpenFOAM/linux/paraview-2.4.2/lib/paraview-2.4/paraview-real: symbol lookup error: /home/alberto/OpenFOAM/OpenFOAM-1.3/lib/linuxGcc4DPOpt/libOpenFOAM.so: undefined symbol: cplus_demangle

The case can be postprocessed without problems using OpenFoam 1.2.

How can I solve the problem?

Thanks in advance,
Alberto

mattijs · April 8, 2006, 09:26

can you report this as a bug?

Two workarounds (not tested):
- use foamToVTK with -noPointValues
- change the cyclic patchFields temporarily to be e.g. fixedValue (and change the cyclicPolyPatch type in the polyMesh/boundary file accordingly)

alberto · April 8, 2006, 13:59

Sure, I'll add it to the bug discussion forum.

Thanks. I'll try your suggestions immediatly.

Unfortunately I've just tried to install OpenFOAM 1.3 on our Rocks cluster and it's not running due to incompatibilities in libs.so.6 versions.

I tried to create a compatibility environment as explained by Novell in http://www.novell.com/coolsolutions/feature/11775.html but it doesn't work

.
I hope to find a solution soon.

Best regards,
Alberto

anne · April 12, 2006, 14:25

Indeed, I also have the same bug when using
paraFOAM on the channelOoles case and dowloading
the field at a time step.

Any solution instead of having to change all the
cyclic ?

Thanks

mattijs · April 13, 2006, 06:58

See

http://www.cfd-online.com/cgi-bin/Op...=7286#POST7286

April 6, 2006, 16:34	Error while postprocessing channelOodles tutorial in OpenFOAM 13	#1
alberto Senior Member Alberto Passalacqua Join Date: Mar 2009 Location: Ames, Iowa, United States Posts: 1,912 Rep Power: 36	While post-processing the channelOodles tutorial case in OpenFOAM 1.3, when I select a time step in ParaView and click on Accept, I get the following error message: alberto@dimension4400:~/OpenFOAM/alberto-1.3/run/tutorials/channelOodles> paraFoam . channel395 /---------------------------------------------------------------------------\ \| ========= \| \| \| \ / F ield \| OpenFOAM: The Open Source CFD Toolbox \| \| \ / O peration \| Version: 1.3 \| \| \ / A nd \| Web: http://www.openfoam.org \| \| \/ M anipulation \| \| \---------------------------------------------------------------------------/ --> FOAM FATAL ERROR : Not implemented From function void CyclicPointPatchField<patchfield,>::evaluate() in file /home/dm2/henry/OpenFOAM/OpenFOAM-1.3/src/OpenFOAM/lnInclude/CyclicPointPatchFie ld.C at line 187. FOAM aborting /home/alberto/OpenFOAM/linux/paraview-2.4.2/lib/paraview-2.4/paraview-real: symbol lookup error: /home/alberto/OpenFOAM/OpenFOAM-1.3/lib/linuxGcc4DPOpt/libOpenFOAM.so: undefined symbol: cplus_demangle The case can be postprocessed without problems using OpenFoam 1.2. How can I solve the problem? Thanks in advance, Alberto __________________ Alberto Passalacqua GeekoCFD - A free distribution based on openSUSE 64 bit with CFD tools, including OpenFOAM. Available as in both physical and virtual formats (current status: http://albertopassalacqua.com/?p=1541) OpenQBMM - An open-source implementation of quadrature-based moment methods. To obtain more accurate answers, please specify the version of OpenFOAM you are using.

April 8, 2006, 09:26	can you report this as a bug?	#2
mattijs Senior Member Mattijs Janssens Join Date: Mar 2009 Posts: 1,419 Rep Power: 26	can you report this as a bug? Two workarounds (not tested): - use foamToVTK with -noPointValues - change the cyclic patchFields temporarily to be e.g. fixedValue (and change the cyclicPolyPatch type in the polyMesh/boundary file accordingly)

April 8, 2006, 13:59	Sure, I'll add it to the bug d	#3
alberto Senior Member Alberto Passalacqua Join Date: Mar 2009 Location: Ames, Iowa, United States Posts: 1,912 Rep Power: 36	Sure, I'll add it to the bug discussion forum. Thanks. I'll try your suggestions immediatly. Unfortunately I've just tried to install OpenFOAM 1.3 on our Rocks cluster and it's not running due to incompatibilities in libs.so.6 versions. I tried to create a compatibility environment as explained by Novell in http://www.novell.com/coolsolutions/feature/11775.html but it doesn't work . I hope to find a solution soon. Best regards, Alberto __________________ Alberto Passalacqua GeekoCFD - A free distribution based on openSUSE 64 bit with CFD tools, including OpenFOAM. Available as in both physical and virtual formats (current status: http://albertopassalacqua.com/?p=1541) OpenQBMM - An open-source implementation of quadrature-based moment methods. To obtain more accurate answers, please specify the version of OpenFOAM you are using.

April 12, 2006, 14:25	Indeed, I also have the same b	#4
anne Member anne dejoan Join Date: Mar 2009 Location: madrid, spain Posts: 66 Rep Power: 17	Indeed, I also have the same bug when using paraFOAM on the channelOoles case and dowloading the field at a time step. Any solution instead of having to change all the cyclic ? Thanks

April 13, 2006, 06:58	See http://www.cfd-online.c	#5
mattijs Senior Member Mattijs Janssens Join Date: Mar 2009 Posts: 1,419 Rep Power: 26	See http://www.cfd-online.com/cgi-bin/Op...=7286#POST7286

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FSI] HronTurek Tutorial OpenFoam extend: no flag movement	roma-aeterna	OpenFOAM CC Toolkits for Fluid-Structure Interaction	13	October 15, 2019 05:11
fluxRequired OpenFoam Versions SimpleFoam Taylor Couette flow tutorial	mörli	OpenFOAM Running, Solving & CFD	0	April 9, 2019 12:50
OpenFOAM XiFoam Tutorial FPE Error	Bish	OpenFOAM	1	November 15, 2017 18:59
OpenFOAM Training, London, Chicago, Munich, Houston 2016-2017	cfd.direct	OpenFOAM Announcements from Other Sources	0	September 14, 2016 04:19
Tutorial Not Running In OpenFOAM	H0T_S0UP	OpenFOAM	2	January 20, 2015 17:58