[OpenFOAM] Line Plot

coops · February 15, 2007, 20:06

Hi all,

I have been trying to plot a field along a line in my model. To do this I have used the Pick filter so that the Probe filter is then available to use. I then select line in the probe filter and specify the line. I thought that would work, however the plot that is returned is only a strainght line with a value of zero. I know that this is incorrect but I don't know how to get this plot to work.

Thanks,

Shaun

gschaider · February 16, 2007, 05:37

You're using the Pick (a single point) as the source for the Probe-Filter. That can't work. What you will want to do is use the "Extract Parts"-Filter to get the "Internal Mesh". On that you can use the Probe-Filter.

There is a number of problems where paraFoam doesn't behave as expected (Streamlines for instance). Most of them can be solved by extracting the Internal Mesh.

February 15, 2007, 20:06	Line Plot	#1
coops Member Shaun Cooper Join Date: Mar 2009 Posts: 54 Rep Power: 17	Hi all, I have been trying to plot a field along a line in my model. To do this I have used the Pick filter so that the Probe filter is then available to use. I then select line in the probe filter and specify the line. I thought that would work, however the plot that is returned is only a strainght line with a value of zero. I know that this is incorrect but I don't know how to get this plot to work. Thanks, Shaun

February 16, 2007, 05:37	You're using the Pick (a singl	#2
gschaider Assistant Moderator Bernhard Gschaider Join Date: Mar 2009 Posts: 4,225 Rep Power: 51	You're using the Pick (a single point) as the source for the Probe-Filter. That can't work. What you will want to do is use the "Extract Parts"-Filter to get the "Internal Mesh". On that you can use the Probe-Filter. There is a number of problems where paraFoam doesn't behave as expected (Streamlines for instance). Most of them can be solved by extracting the Internal Mesh. __________________ Note: I don't use "Friend"-feature on this forum out of principle. Ah. And by the way: I'm not on Facebook either. So don't be offended if I don't accept your invitation/friend request

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Gmsh] No cells read from file ".msh"	hwsv07	OpenFOAM Meshing & Mesh Conversion	5	August 13, 2018 16:42
8x icoFoam speed up with Cufflink CUDA solver library	kmooney	OpenFOAM Running, Solving & CFD	42	November 6, 2012 12:37
[blockMesh] error message with modeling a cube with a hold at the center	hsingtzu	OpenFOAM Meshing & Mesh Conversion	2	March 14, 2012 10:56
Installation OF1.5-dev	ttdtud	OpenFOAM Installation	46	May 5, 2009 03:32
[blockMesh] BlockMeshmergePatchPairs polyTopoChanger	benru	OpenFOAM Meshing & Mesh Conversion	3	June 29, 2008 22:24