|
[Sponsors] |
[OpenFOAM] Visualization of breaking of a dam tutorial |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
July 13, 2007, 07:00 |
Visualization of breaking of a dam tutorial
|
#1 |
Member
Lasse Boehling
Join Date: Mar 2009
Posts: 35
Rep Power: 17 |
Hi,
This may be a stupid question, but here it comes: I can only visualize data from the damBreak tutorial from times later than 0.8 seconds. Between 0 and 0.8 there are a button with three dots. Nothing happens when I click them. How do I visualize times between 0 and 0.8 seconds? Any help will be much apreciated. -- Lasse |
|
July 13, 2007, 08:29 |
Change the lower and upper lim
|
#2 |
Senior Member
Srinath Madhavan (a.k.a pUl|)
Join Date: Mar 2009
Location: Edmonton, AB, Canada
Posts: 703
Rep Power: 21 |
Change the lower and upper limits for time in Paraview. It's located little below the Accept button under the Parameters tab. Usually the numbers are 5 lower steps and 10 upper steps. I could be inaccurate with those numbers but I'm fairly confident you should get what I'm saying.
|
|
July 13, 2007, 09:15 |
Thank you. It worked :-)
|
#3 |
Member
Lasse Boehling
Join Date: Mar 2009
Posts: 35
Rep Power: 17 |
Thank you. It worked :-)
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Problem on Fluent Tutorial: Horizontal Film Boilig | Feng | FLUENT | 2 | April 13, 2013 06:34 |
3D dam breaking in a box | koWUalsky | OpenFOAM Running, Solving & CFD | 3 | February 27, 2010 00:40 |
CFD Animations of breaking waves | Dommermuth | Main CFD Forum | 0 | June 17, 2009 12:47 |
Dam Breaking Problem | B Godderidge | Siemens | 0 | May 19, 2005 05:35 |
Diverge in 2d dam breaking case | Jason | FLUENT | 0 | November 1, 2002 04:12 |