[General] display problems with converted mesh from CCM+ into OpenFOAM

mehrdad_kbg · July 25, 2012, 15:02

Hi everybody,
I am trying to simulate a manifold using OpenFOAM. The geometry was created in CCM+ so I import the mesh to OpenFOAM. During the conversion I do not see any problem and the checkMesh shows fine. My problem is when I want to see my imported mesh in paraview instead of my real geometry the software shows some thing different. instead of cylinder it's a box and it was changed. Do you have any comment for this problem?
I appreciate if you help me.

wyldckat · July 25, 2012, 15:38

Greetings mehrdad_kbg,

How many "polyMesh" folders does your case have?

Code:

find . -name polyMesh

I'm guessing you're seeing in ParaView only the mesh that might be in the "constant/polyMesh" folder, while also having a second one in "0/polyMesh" or "1/polyMesh".

Best regards,
Bruno

July 25, 2012, 15:02	display problems with converted mesh from CCM+ into OpenFOAM	#1
mehrdad_kbg New Member Join Date: Sep 2010 Location: Windsor, Ontario Posts: 17 Rep Power: 16	Hi everybody, I am trying to simulate a manifold using OpenFOAM. The geometry was created in CCM+ so I import the mesh to OpenFOAM. During the conversion I do not see any problem and the checkMesh shows fine. My problem is when I want to see my imported mesh in paraview instead of my real geometry the software shows some thing different. instead of cylinder it's a box and it was changed. Do you have any comment for this problem? I appreciate if you help me.

July 25, 2012, 15:38		#2
wyldckat Retired Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 10,981 Blog Entries: 45 Rep Power: 128	Greetings mehrdad_kbg, How many "polyMesh" folders does your case have? Code: find . -name polyMesh I'm guessing you're seeing in ParaView only the mesh that might be in the "constant/polyMesh" folder, while also having a second one in "0/polyMesh" or "1/polyMesh". Best regards, Bruno __________________ OpenFOAM: FAQ \| Getting started Forum: How to get help, to post code/output and forum guide Read this before sending me PM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OpenFOAM course for beginners	Jibran	OpenFOAM Announcements from Other Sources	2	November 4, 2019 09:51
Can fluent tet mesh be converted into Polyhedral mesh in CCM?	jealor	STAR-CCM+	7	January 10, 2018 06:25
[Commercial meshers] converting ICEM mesh to OpenFOAM	bmikuz	OpenFOAM Meshing & Mesh Conversion	9	May 10, 2016 17:47
Moving mesh	Niklas Wikstrom (Wikstrom)	OpenFOAM Running, Solving & CFD	122	June 15, 2014 07:20
fluent add additional zones for the mesh file	SSL	FLUENT	2	January 26, 2008 12:55