Calculating the yPlus value for SA-model simulation

Siren · February 3, 2012, 08:45

Hello everyone!

I've done a DES-Simulation with an modified Spalart-Allmaras turbulence model wich does not solve the turbulent kinematic Energy "k".

Since I'm interested in the yPlus-values and the standard OpenFOAM tool for the calculation of this value needs the turb. kin. Energy, I wonder if there is a easy solution or tool wich gives me the yPlus-values.

Have a nice day.

P.S.: I'm using 1.7.1 for this.

wiedangel · July 2, 2012, 09:28

Hi Siren, there is a tool in openFoam called yPlusLES and another one called yPlusRAS but I did not good results with it and I am writing my own tool for that.
Try the one in OpenFoam, it will be nice to have your feedback.

Regards

Anne Lincke · July 3, 2012, 11:38

Have a look at this thread

http://www.cfd-online.com/Forums/ope...s-1-7-1-a.html

There is supplied an additional tool for the computation of yPlus.

February 3, 2012, 08:45	Calculating the yPlus value for SA-model simulation	#1
Siren New Member Join Date: Feb 2012 Posts: 1 Rep Power: 0	Hello everyone! I've done a DES-Simulation with an modified Spalart-Allmaras turbulence model wich does not solve the turbulent kinematic Energy "k". Since I'm interested in the yPlus-values and the standard OpenFOAM tool for the calculation of this value needs the turb. kin. Energy, I wonder if there is a easy solution or tool wich gives me the yPlus-values. Have a nice day. P.S.: I'm using 1.7.1 for this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Use of k-epsilon and k-omega Models	Jade M	Main CFD Forum	40	January 27, 2023 08:18
Polyflow Simulation with ViscoElastic Model memory problem	sid2909	FLUENT	0	May 10, 2010 06:29
Experimental And Simulation Data for my model	Timothy Song	Siemens	0	January 12, 2009 06:23
YPlus Values and SST Model	Jenny	CFX	1	June 22, 2008 19:47
RNG ke model & Yplus value	Pete	CFX	2	February 16, 2005 02:11

July 2, 2012, 09:28		#2
wiedangel Member wided Join Date: Jul 2010 Posts: 54 Rep Power: 16	Hi Siren, there is a tool in openFoam called yPlusLES and another one called yPlusRAS but I did not good results with it and I am writing my own tool for that. Try the one in OpenFoam, it will be nice to have your feedback. Regards

July 3, 2012, 11:38		#3
Anne Lincke Senior Member Anne Gerdes Join Date: Aug 2010 Location: Hamburg Posts: 168 Rep Power: 16	Have a look at this thread http://www.cfd-online.com/Forums/ope...s-1-7-1-a.html There is supplied an additional tool for the computation of yPlus.