Tutorials

Deepu · January 5, 2012, 05:48

Hi

I wish to learn OpenFoam. Where would I get a Complete training guide to learn this application? Any help will be appreciated.

Bernhard · January 5, 2012, 06:50

Did you consider this?
http://openfoam.com/training/

I read you were looking for a guide, then I can refer you to the User and Programmer Guide:
http://www.openfoam.org/docs/user/

anon_a · January 5, 2012, 07:01

The user guide (http://www.openfoam.org/docs/user/) is a must.
Other than that, this is a fairly common subject in this forum:
http://www.cfd-online.com/Forums/ope...-new-user.html
http://www.cfd-online.com/Forums/ope...-new-user.html
http://www.cfd-online.com/Forums/ope...ogramming.html

I would personally advise to read the user guide, try the examples in the "tutorials" directory and then get involved with the code. The last step is the most important, since it gradually leads to better understanding and independency.

January 5, 2012, 05:48	Tutorials	#1
Deepu New Member Deepak P Nair Join Date: Jan 2012 Posts: 4 Rep Power: 14	Hi I wish to learn OpenFoam. Where would I get a Complete training guide to learn this application? Any help will be appreciated.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Water Height in Tutorials	Cluain	CFX	2	November 3, 2011 06:36
Dynamic mesh tutorials	atertiarch	FLUENT	3	January 16, 2011 08:02
Install tutorials	jonlemur	OpenFOAM Installation	4	August 8, 2007 15:15
tutorials for icem-cfd v4.1	vince	Main CFD Forum	0	August 23, 2003 16:25
Where can I find Airpak help doc. and tutorials?	Hotlood Wong	FLUENT	3	April 23, 2001 04:55

January 5, 2012, 06:50		#2
Bernhard Senior Member Bernhard Join Date: Sep 2009 Location: Delft Posts: 790 Rep Power: 22	Did you consider this? http://openfoam.com/training/ I read you were looking for a guide, then I can refer you to the User and Programmer Guide: http://www.openfoam.org/docs/user/

January 5, 2012, 07:01		#3
anon_a Disabled Join Date: Mar 2011 Posts: 174 Rep Power: 15	The user guide (http://www.openfoam.org/docs/user/) is a must. Other than that, this is a fairly common subject in this forum: http://www.cfd-online.com/Forums/ope...-new-user.html http://www.cfd-online.com/Forums/ope...-new-user.html http://www.cfd-online.com/Forums/ope...ogramming.html I would personally advise to read the user guide, try the examples in the "tutorials" directory and then get involved with the code. The last step is the most important, since it gradually leads to better understanding and independency.