meshTools.H from 1.7.1 to 2.0.1

Rickard.Solsjo · December 8, 2011, 04:05

Hey guys
Trying to recompile a new modeled we implemented into 2.0.1 but it seems as if the dynamic mesh treatment is different from before. Things works smoothly except this
/lap/openfoam/2.0.1/src/lagrangian/basic/lnInclude/particleTemplates.C(33): catastrophic error: cannot open source file "meshTools.H"
#include "meshTools.H"

Before I just sourced to ../combustion/engine \
but maybe something has changed or do maybe there is something different in my .C or sth. ?

Thanks!

wyldckat · December 12, 2011, 18:13

Hi Rickard,

Well that's a bit odd... "meshTools.H" is in the same place as usual in both versions: "OpenFOAM-*/src/meshTools/lnInclude"
Maybe the file "Make/options" on your code got messed up during transport from one version to the other!?

Best regards,
Bruno

Rickard.Solsjo · December 13, 2011, 05:29

Thanks Bruno
I will have a look at this. I did add the include command to src but I must've done something wrong (obviously).
Thanks again

December 8, 2011, 04:05	meshTools.H from 1.7.1 to 2.0.1	#1
Rickard.Solsjo Senior Member Rickard Join Date: May 2010 Location: Lund, Skåne, Sweden Posts: 143 Rep Power: 16	Hey guys Trying to recompile a new modeled we implemented into 2.0.1 but it seems as if the dynamic mesh treatment is different from before. Things works smoothly except this /lap/openfoam/2.0.1/src/lagrangian/basic/lnInclude/particleTemplates.C(33): catastrophic error: cannot open source file "meshTools.H" #include "meshTools.H" Before I just sourced to ../combustion/engine \ but maybe something has changed or do maybe there is something different in my .C or sth. ? Thanks!

December 12, 2011, 18:13		#2
wyldckat Retired Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 10,981 Blog Entries: 45 Rep Power: 128	Hi Rickard, Well that's a bit odd... "meshTools.H" is in the same place as usual in both versions: "OpenFOAM-/src/meshTools/lnInclude" Maybe the file "Make/options" on your code got messed up during transport* from one version to the other!? Best regards, Bruno __________________ OpenFOAM: FAQ \| Getting started Forum: How to get help, to post code/output and forum guide Read this before sending me PM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SpalartAllmaras wall function in OpenFOAM 2.0.1	moser_r	OpenFOAM Running, Solving & CFD	4	September 18, 2013 18:37
Split cyclic patches in Openfoam 1.7.1	claco	OpenFOAM	1	December 12, 2012 08:24
interFoam (OF 1.7.1) in parallel ..need help	farhagim	OpenFOAM	4	July 26, 2012 17:42
Shadow Wall/Thermo Baffle in OF 1.7.1	newOFuser	OpenFOAM	1	March 1, 2012 18:17
OpenCFD release OpenFOAM® version 1.7.1	opencfd	OpenFOAM Announcements from ESI-OpenCFD	0	August 26, 2010 12:40

December 13, 2011, 05:29		#3
Rickard.Solsjo Senior Member Rickard Join Date: May 2010 Location: Lund, Skåne, Sweden Posts: 143 Rep Power: 16	Thanks Bruno I will have a look at this. I did add the include command to src but I must've done something wrong (obviously). Thanks again