|
[Sponsors] |
October 11, 2011, 11:07 |
handling polyMesh/cells file
|
#1 | ||
New Member
Alessandro Zomparelli
Join Date: Jun 2011
Posts: 8
Rep Power: 15 |
Hi to all!
I'm trying to export a geometry from "processing" to "OpenFOAM". I wrote the following files based on my cell-mesh configuration: "points", "boundary", "faces", "owner" and "neighbour". The resulting mesh gives error in some cases or return to me a tangled mesh in paraFoam with only tri and quad faces. Thinking that the problem was due to the fact that my cells are polyhedral I decided to try with a "cells" file instead of "owner" and "neighbour". (Is it right?) My problem is now: how to write a "cells" file? I tried something like this: Quote:
Quote:
thanks Alessandro |
|||
October 11, 2011, 11:29 |
|
#2 | |
New Member
Alessandro Zomparelli
Join Date: Jun 2011
Posts: 8
Rep Power: 15 |
ops, I found the error, the number of cells was wrong at the beginning of list
but now it gives to me a different error. After launching paraFoam, when i click on the eye-icon of my mesh the program crash. This is the output from terminal: Quote:
|
||
Tags |
cells polyhedral openfoam |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[swak4Foam] GroovyBC the dynamic cousin of funkySetFields that lives on the suburb of the mesh | gschaider | OpenFOAM Community Contributions | 300 | October 29, 2014 19:00 |
channelFoam for a 3D pipe | AlmostSurelyRob | OpenFOAM | 3 | June 24, 2011 14:06 |
1.7.x Environment Variables on Linux 10.04 | rasma | OpenFOAM Installation | 9 | July 30, 2010 05:43 |
[blockMesh] BlockMesh FOAM warning | gaottino | OpenFOAM Meshing & Mesh Conversion | 7 | July 19, 2010 15:11 |
ParaView Compilation | jakaranda | OpenFOAM Installation | 3 | October 27, 2008 12:46 |