Would it be possible to add the radiation model into the reactinFoam solver?

pajofego · August 15, 2011, 15:55

Hello all,

we are using very successful reactingfoam for our combustion simulation. So we are thinking about to implement the radiation model as realized in the buoyantSimpleRadiationFoam solver for reactingfoam. We have no knowledge in programming our own solver and we are not familiar with the foam programming concept. So we would like to know how big is the effort to extend reactingfoam with the radition model of buoyantSimpleRadiationFoam? Is it like copy paste from buoyantSimpleRadiationFoam or is it something which should implemented completely new by the scratch?

Many thanks for you comments and best regards.
pajofego

pajofego · August 15, 2011, 16:51

o.k., 10 min later I've compiled a version! I'm not sure if it's realy so simple.

I will try to set up a case...! Feel free to test it too.

Marshak · February 8, 2012, 20:52

Can you kindly let me know if you got your case working properly?

Marshak · June 21, 2012, 06:41

Here below i found links on how to add radiation into reactingfoam:

http://www.tfd.chalmers.se/~hani/kurser/OS_CFD_2011/SajjadHaider/reactingFoamSolverToCalculateRadiativeHeatTransfer .pdf

http://www.tfd.chalmers.se/~hani/kurser/OS_CFD_2011/SajjadHaider/reactingFoamRadiation.tar.gz

August 15, 2011, 15:55	Would it be possible to add the radiation model into the reactinFoam solver?	#1
pajofego New Member Paul Join Date: Mar 2009 Posts: 19 Rep Power: 17	Hello all, we are using very successful reactingfoam for our combustion simulation. So we are thinking about to implement the radiation model as realized in the buoyantSimpleRadiationFoam solver for reactingfoam. We have no knowledge in programming our own solver and we are not familiar with the foam programming concept. So we would like to know how big is the effort to extend reactingfoam with the radition model of buoyantSimpleRadiationFoam? Is it like copy paste from buoyantSimpleRadiationFoam or is it something which should implemented completely new by the scratch? Many thanks for you comments and best regards. pajofego

June 21, 2012, 06:41		#4
Marshak New Member Join Date: Feb 2012 Posts: 25 Rep Power: 14	Here below i found links on how to add radiation into reactingfoam: http://www.tfd.chalmers.se/~hani/kurser/OS_CFD_2011/SajjadHaider/reactingFoamSolverToCalculateRadiativeHeatTransfer .pdf http://www.tfd.chalmers.se/~hani/kurser/OS_CFD_2011/SajjadHaider/reactingFoamRadiation.tar.gz Last edited by Marshak; June 21, 2012 at 08:45.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fiber Suspension Solver laminar AdvaniFolgarTucker model	kerstin	OpenFOAM Running, Solving & CFD	6	October 28, 2020 10:03
Using incident radiation (G) in the solver	Mostafa	OpenFOAM Programming & Development	4	May 26, 2019 21:51
Weller combustion model - engineFoam solver.	ghindi	OpenFOAM Running, Solving & CFD	1	May 6, 2016 06:56
Radiation Model - Spectral Model	Ray	CFX	3	April 10, 2006 10:33
Help: Radiation model	MANOJKUMAR	FLUENT	4	November 24, 2005 03:45

February 8, 2012, 20:52		#3
Marshak New Member Join Date: Feb 2012 Posts: 25 Rep Power: 14	Can you kindly let me know if you got your case working properly?