[tH3f0rC3]

Hi,

I have problems of an increasing density.
Even after the third time step (deltat=1) Min/max rho = 0,38 / 2,82.
The fluid is air. So I would expect something around 0,6

I think the boundary conditions are set wrong. But I have made a setup identic to an other case where the density doesn't increase.

Does someone have a clue which boundary conditions are prone to increase density?

Best Regards,
tH3f0rC3

[tH3f0rC3]

Time = 0

Solving for fluid region air
DILUPBiCG: Solving for Ux, Initial residual = 1, Final residual = 0.075451081, No Iterations 1
DILUPBiCG: Solving for Uy, Initial residual = 1, Final residual = 0.016409508, No Iterations 2
DILUPBiCG: Solving for Uz, Initial residual = 1, Final residual = 0.085782023, No Iterations 1
DILUPBiCG: Solving for h, Initial residual = 0.99999999, Final residual = 0.01679794, No Iterations 2
Min/max T:573 973.15
GAMG: Solving for p_rgh, Initial residual = 1, Final residual = 0.0092815957, No Iterations 15
time step continuity errors : sum local = 0.008788245, global = -0.00098784668, cumulative = -0.00098784668
Min/max rho:0.35717528 0.68357341
DILUPBiCG: Solving for epsilon, Initial residual = 0.16612435, Final residual = 0.01454185, No Iterations 1
DILUPBiCG: Solving for k, Initial residual = 1, Final residual = 0.017992387, No Iterations 2
maxResidual: 1 convergence criterion: 1e-05
Solving for solid region stahl
DICPCG: Solving for T, Initial residual = 0.99999768, Final residual = 0.068942702, No Iterations 3
Min/max T:573.14686 573.15
maxResidual: 0.99999768 convergence criterion: 0
Solving for solid region nickel
DICPCG: Solving for T, Initial residual = 0.99994028, Final residual = 0.090359384, No Iterations 3
Min/max T:573.14825 573.15
maxResidual: 0.99994028 convergence criterion: 0
ExecutionTime = 38.64 s ClockTime = 39 s
Time = 1

Solving for fluid region air
DILUPBiCG: Solving for Ux, Initial residual = 0.53667496, Final residual = 0.0085865982, No Iterations 2
DILUPBiCG: Solving for Uy, Initial residual = 0.35251486, Final residual = 0.0051391246, No Iterations 2
DILUPBiCG: Solving for Uz, Initial residual = 0.52233136, Final residual = 0.0087582447, No Iterations 2
DILUPBiCG: Solving for h, Initial residual = 0.21057797, Final residual = 0.012716529, No Iterations 1
Min/max T:462.59027 973.15
GAMG: Solving for p_rgh, Initial residual = 0.70446497, Final residual = 0.0050321126, No Iterations 11
time step continuity errors : sum local = 0.55674613, global = 0.024030378, cumulative = 0.023042532
Min/max rho:0.35717528 1.0058956
DILUPBiCG: Solving for epsilon, Initial residual = 0.46625579, Final residual = 0.0099261637, No Iterations 2
DILUPBiCG: Solving for k, Initial residual = 0.43643392, Final residual = 0.0066078085, No Iterations 2
maxResidual: 0.70446497 convergence criterion: 1e-05
Solving for solid region stahl
DICPCG: Solving for T, Initial residual = 0.25011936, Final residual = 0.012310353, No Iterations 3
Min/max T:573.14525 573.15
maxResidual: 0.25011936 convergence criterion: 0
Solving for solid region nickel
DICPCG: Solving for T, Initial residual = 0.25023018, Final residual = 0.016446415, No Iterations 3
Min/max T:573.14708 573.15
maxResidual: 0.25023018 convergence criterion: 0
ExecutionTime = 64.08 s ClockTime = 65 s
Time = 2

Solving for fluid region air
DILUPBiCG: Solving for Ux, Initial residual = 0.13403801, Final residual = 0.013230832, No Iterations 1
DILUPBiCG: Solving for Uy, Initial residual = 0.16595325, Final residual = 0.0020208299, No Iterations 2
DILUPBiCG: Solving for Uz, Initial residual = 0.25960355, Final residual = 0.025016317, No Iterations 1
DILUPBiCG: Solving for h, Initial residual = 0.16627559, Final residual = 0.010752132, No Iterations 1
Min/max T:534.64735 973.15
GAMG: Solving for p_rgh, Initial residual = 0.89506057, Final residual = 0.0080816829, No Iterations 13
time step continuity errors : sum local = 0.45956801, global = 0.0087655559, cumulative = 0.031808087
Min/max rho:0.35717528 1.7719564
DILUPBiCG: Solving for epsilon, Initial residual = 0.21378091, Final residual = 0.0026405132, No Iterations 2
DILUPBiCG: Solving for k, Initial residual = 0.22492817, Final residual = 0.0028870615, No Iterations 2
maxResidual: 0.89506057 convergence criterion: 1e-05
Solving for solid region stahl
DICPCG: Solving for T, Initial residual = 0.27108477, Final residual = 0.014070673, No Iterations 3
Min/max T:573.13955 573.15
maxResidual: 0.27108477 convergence criterion: 0
Solving for solid region nickel
DICPCG: Solving for T, Initial residual = 0.2830701, Final residual = 0.020013987, No Iterations 3
Min/max T:573.14254 573.15
maxResidual: 0.2830701 convergence criterion: 0
ExecutionTime = 89.86 s ClockTime = 92 s
Time = 3

Solving for fluid region air
DILUPBiCG: Solving for Ux, Initial residual = 0.23944968, Final residual = 0.0038426078, No Iterations 2
DILUPBiCG: Solving for Uy, Initial residual = 0.21150255, Final residual = 0.0020588047, No Iterations 2
DILUPBiCG: Solving for Uz, Initial residual = 0.32799999, Final residual = 0.0046439848, No Iterations 2
DILUPBiCG: Solving for h, Initial residual = 0.10107597, Final residual = 0.0078826869, No Iterations 1
Min/max T:386.21599 973.15
GAMG: Solving for p_rgh, Initial residual = 0.49927178, Final residual = 0.0044080049, No Iterations 7
time step continuity errors : sum local = 0.34430616, global = -0.030489443, cumulative = 0.0013186441
Min/max rho:0.35717528 2.6131937
DILUPBiCG: Solving for epsilon, Initial residual = 0.1490834, Final residual = 0.0017493873, No Iterations 2
DILUPBiCG: Solving for k, Initial residual = 0.16570862, Final residual = 0.0019370394, No Iterations 2
maxResidual: 0.49927178 convergence criterion: 1e-05
Solving for solid region stahl
DICPCG: Solving for T, Initial residual = 0.16418744, Final residual = 0.0058820311, No Iterations 3
Min/max T:573.13867 573.15
maxResidual: 0.16418744 convergence criterion: 0
Solving for solid region nickel
DICPCG: Solving for T, Initial residual = 0.19501926, Final residual = 0.007847645, No Iterations 3
Min/max T:573.14225 573.15483
maxResidual: 0.19501926 convergence criterion: 0
ExecutionTime = 113.36 s ClockTime = 116 s
Time = 4

Solving for fluid region air
DILUPBiCG: Solving for Ux, Initial residual = 0.22595321, Final residual = 0.0030393622, No Iterations 2
DILUPBiCG: Solving for Uy, Initial residual = 0.15238153, Final residual = 0.0013200909, No Iterations 2
DILUPBiCG: Solving for Uz, Initial residual = 0.22923122, Final residual = 0.002846462, No Iterations 2
DILUPBiCG: Solving for h, Initial residual = 0.062614351, Final residual = 0.0006806479, No Iterations 2
Min/max T:279.0118 973.15
GAMG: Solving for p_rgh, Initial residual = 0.53300073, Final residual = 0.003828913, No Iterations 13
time step continuity errors : sum local = 0.26512713, global = -0.013485795, cumulative = -0.012167151
Min/max rho:0.35717528 2.7375473
DILUPBiCG: Solving for epsilon, Initial residual = 0.1074059, Final residual = 0.0012632828, No Iterations 2
DILUPBiCG: Solving for k, Initial residual = 0.10654469, Final residual = 0.0013340781, No Iterations 2
maxResidual: 0.53300073 convergence criterion: 1e-05
Solving for solid region stahl
DICPCG: Solving for T, Initial residual = 0.13716868, Final residual = 0.0042027179, No Iterations 3
Min/max T:573.1365 573.15153
maxResidual: 0.13716868 convergence criterion: 0
Solving for solid region nickel
DICPCG: Solving for T, Initial residual = 0.22413245, Final residual = 0.012011063, No Iterations 3
Min/max T:573.13721 573.16733
maxResidual: 0.22413245 convergence criterion: 0
ExecutionTime = 140.03 s ClockTime = 143 s
Time = 5

Solving for fluid region air
DILUPBiCG: Solving for Ux, Initial residual = 0.13262467, Final residual = 0.0018728448, No Iterations 2
DILUPBiCG: Solving for Uy, Initial residual = 0.082841106, Final residual = 0.00090359221, No Iterations 2
DILUPBiCG: Solving for Uz, Initial residual = 0.13754567, Final residual = 0.0017803001, No Iterations 2
DILUPBiCG: Solving for h, Initial residual = 0.041531078, Final residual = 0.00048567902, No Iterations 2
Min/max T:103.60674 973.15
GAMG: Solving for p_rgh, Initial residual = 0.53253605, Final residual = 0.0047493003, No Iterations 11
time step continuity errors : sum local = 0.2933433, global = -0.018351634, cumulative = -0.030518785
Min/max rho:0.1 3.3626218
DILUPBiCG: Solving for epsilon, Initial residual = 0.088507022, Final residual = 0.0010018227, No Iterations 2
DILUPBiCG: Solving for k, Initial residual = 0.075575277, Final residual = 0.00099140799, No Iterations 2
maxResidual: 0.53253605 convergence criterion: 1e-05
Solving for solid region stahl
DICPCG: Solving for T, Initial residual = 0.14197114, Final residual = 0.0055143839, No Iterations 3
Min/max T:573.13286 573.15009
maxResidual: 0.14197114 convergence criterion: 0
Solving for solid region nickel
DICPCG: Solving for T, Initial residual = 0.18726851, Final residual = 0.0087153376, No Iterations 3
Min/max T:573.12588 573.16692
maxResidual: 0.18726851 convergence criterion: 0
ExecutionTime = 165.79 s ClockTime = 169 s
_______________________________________

This is the error message.
Maybe someone of you knows why the temperature goes down wo fast and why the density goes to 0.1 and to 3.36.
Maybe there is a typical error which has this for result.

Best Regards,
tH3f0rC3

[truong_nm]

Hi tH3f0rC3,

Would you mind expliciting your case more precisely please? What are you studying, what is the solver you're using, maybe even share the OF case.

Minh

[tH3f0rC3]

I'm using the chtMultiRegionSimpleFoam-Solver.
heat transfer from hot air to two solids is solved in this case.
The flow is turbulent.

I will post the case files on Monday.

Best Regards,
tH3f0rC3

[tH3f0rC3]

The whole case is too large.
I uploaded the 0-files.
There must be the mistake.

Maybe it has to do something with the velocity at the Outlet! I don't really know the velocity at the outlet.
So how do I have to set up the boundary condition for unknown velocity at the outlet?

Remember, the temperature and the density are solved strange.
I have a new log-file of a test run of the case:

/*---------------------------------------------------------------------------*\
| =========                 |                                                 |
| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
|  \\    /   O peration     | Version:  1.7.1                                 |
|   \\  /    A nd           | Web:      www.OpenFOAM.com                      |
|    \\/     M anipulation  |                                                 |
\*---------------------------------------------------------------------------*/
Build  : 1.7.1-03e7e056c215
Exec   : chtMultiRegionSimpleFoam
Date   : Apr 29 2011
Time   : 11:54:01
Host   : dehgbwux2003.hgb.de.corp
PID    : 11803
Case   : /scratch/run2904
nProcs : 1
SigFpe : Enabling floating point exception trapping (FOAM_SIGFPE).
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time
Create fluid mesh for region air for time = 0
Create solid mesh for region stahl for time = 0
Create solid mesh for region nickel for time = 0
*** Reading fluid mesh thermophysical properties for region air
    Adding to thermoFluid
Selecting thermodynamics package hPsiThermo<pureMixture<constTransport<specieThermo<hConstThermo<perfectGas>>>>>
    Adding to rhoFluid
    Adding to KFluid
    Adding to UFluid
--> FOAM Warning : 
    From function Field<Type>::Field(const word& keyword, const dictionary&, const label)
    in file /local/OpenFOAM/src/OpenFOAM-1.7.1/src/OpenFOAM/lnInclude/Field.C at line 262
    Reading "/scratch/run2904/0/air/U::boundaryField::Outlet" from line 72 to line 74
    expected keyword 'uniform' or 'nonuniform', assuming deprecated Field format from Foam version 2.0.
    Adding to phiFluid
    Adding to gFluid
    Adding to turbulence
Selecting turbulence model type RASModel
Selecting RAS turbulence model kEpsilon
kEpsilonCoeffs
{
    Cmu             0.09;
    C1              1.44;
    C2              1.92;
    C3              -0.33;
    sigmak          1;
    sigmaEps        1.3;
    Prt             1;
}
    Adding to ghFluid
    Adding to ghfFluid
*** Reading solid mesh thermophysical properties for region stahl
    Adding to rhos
    Adding to cps
    Adding to Ks
    Adding to Ts
*** Reading solid mesh thermophysical properties for region nickel
    Adding to rhos
    Adding to cps
    Adding to Ks
    Adding to Ts
Time = 0
 
Solving for fluid region air
DILUPBiCG:  Solving for Ux, Initial residual = 1, Final residual = 0.075840117, No Iterations 1
DILUPBiCG:  Solving for Uy, Initial residual = 1, Final residual = 0.014107903, No Iterations 2
DILUPBiCG:  Solving for Uz, Initial residual = 1, Final residual = 0.083705137, No Iterations 1
DILUPBiCG:  Solving for h, Initial residual = 0.99998316, Final residual = 0.01319639, No Iterations 2
Min/max T:573 573.15
GAMG:  Solving for p_rgh, Initial residual = 1, Final residual = 0.0051781876, No Iterations 13
time step continuity errors : sum local = 0.0039532489, global = -0.00063879053, cumulative = -0.00063879053
Min/max rho:0.60644705 0.78142354
DILUPBiCG:  Solving for epsilon, Initial residual = 0.16563658, Final residual = 0.014436588, No Iterations 1
DILUPBiCG:  Solving for k, Initial residual = 1, Final residual = 0.016214493, No Iterations 2
maxResidual: 1  convergence criterion: 1e-05
Solving for solid region stahl
DICPCG:  Solving for T, Initial residual = 0.99999768, Final residual = 0.068942703, No Iterations 3
Min/max T:573.14686 573.15
maxResidual: 0.99999768  convergence criterion: 0
Solving for solid region nickel
DICPCG:  Solving for T, Initial residual = 0.99994028, Final residual = 0.090359384, No Iterations 3
Min/max T:573.14825 573.15
maxResidual: 0.99994028  convergence criterion: 0
ExecutionTime = 63.86 s  ClockTime = 66 s
Time = 1
 
Solving for fluid region air
DILUPBiCG:  Solving for Ux, Initial residual = 0.56895662, Final residual = 0.0089982176, No Iterations 2
DILUPBiCG:  Solving for Uy, Initial residual = 0.3536822, Final residual = 0.0050440663, No Iterations 2
DILUPBiCG:  Solving for Uz, Initial residual = 0.5518506, Final residual = 0.0092442119, No Iterations 2
DILUPBiCG:  Solving for h, Initial residual = 0.32564488, Final residual = 0.0045377951, No Iterations 2
Min/max T:571.58091 573.15
GAMG:  Solving for p_rgh, Initial residual = 0.29477473, Final residual = 0.001941573, No Iterations 7
time step continuity errors : sum local = 0.67825649, global = 0.089694597, cumulative = 0.089055807
Min/max rho:0.60644705 1.3110837
DILUPBiCG:  Solving for epsilon, Initial residual = 0.55402215, Final residual = 0.011962423, No Iterations 2
DILUPBiCG:  Solving for k, Initial residual = 0.49599343, Final residual = 0.0080077355, No Iterations 2
bounding k, min: -18.943042 max: 398.72545 average: 7.6498791
maxResidual: 0.56895662  convergence criterion: 1e-05
Solving for solid region stahl
DICPCG:  Solving for T, Initial residual = 0.27182412, Final residual = 0.013898103, No Iterations 3
Min/max T:573.1445 573.15
maxResidual: 0.27182412  convergence criterion: 0
Solving for solid region nickel
DICPCG:  Solving for T, Initial residual = 0.28695613, Final residual = 0.019926723, No Iterations 3
Min/max T:573.14588 573.15
maxResidual: 0.28695613  convergence criterion: 0
ExecutionTime = 112.2 s  ClockTime = 115 s
Time = 2
 
Solving for fluid region air
DILUPBiCG:  Solving for Ux, Initial residual = 0.16278617, Final residual = 0.0021432109, No Iterations 2
DILUPBiCG:  Solving for Uy, Initial residual = 0.17412247, Final residual = 0.0021318066, No Iterations 2
DILUPBiCG:  Solving for Uz, Initial residual = 0.28461952, Final residual = 0.0038330836, No Iterations 2
DILUPBiCG:  Solving for h, Initial residual = 0.26449442, Final residual = 0.004033607, No Iterations 2
Min/max T:571.88061 573.15
GAMG:  Solving for p_rgh, Initial residual = 0.77751685, Final residual = 0.0062887736, No Iterations 6
time step continuity errors : sum local = 0.59195663, global = 0.010690549, cumulative = 0.099746356
Min/max rho:0.40199287 1.9574668
DILUPBiCG:  Solving for epsilon, Initial residual = 0.28135636, Final residual = 0.0037514786, No Iterations 2
DILUPBiCG:  Solving for k, Initial residual = 0.32784195, Final residual = 0.0045176894, No Iterations 2
maxResidual: 0.77751685  convergence criterion: 1e-05
Solving for solid region stahl
DICPCG:  Solving for T, Initial residual = 0.3036831, Final residual = 0.016412494, No Iterations 3
Min/max T:573.13632 573.15
maxResidual: 0.3036831  convergence criterion: 0
Solving for solid region nickel
DICPCG:  Solving for T, Initial residual = 0.31418541, Final residual = 0.022825596, No Iterations 3
Min/max T:573.13808 573.15
maxResidual: 0.31418541  convergence criterion: 0
ExecutionTime = 160.56 s  ClockTime = 165 s
Time = 3
 
Solving for fluid region air
DILUPBiCG:  Solving for Ux, Initial residual = 0.39750205, Final residual = 0.0078947914, No Iterations 2
DILUPBiCG:  Solving for Uy, Initial residual = 0.28829257, Final residual = 0.0061730623, No Iterations 2
DILUPBiCG:  Solving for Uz, Initial residual = 0.58431649, Final residual = 0.010649235, No Iterations 2
DILUPBiCG:  Solving for h, Initial residual = 0.5205866, Final residual = 0.012444494, No Iterations 2
Min/max T:569.27616 583.4459
GAMG:  Solving for p_rgh, Initial residual = 0.47161716, Final residual = 0.0032267485, No Iterations 8
time step continuity errors : sum local = 0.36175555, global = -0.02833689, cumulative = 0.071409465
Min/max rho:0.1 2.1166729
DILUPBiCG:  Solving for epsilon, Initial residual = 0.18346751, Final residual = 0.0011161829, No Iterations 1
DILUPBiCG:  Solving for k, Initial residual = 0.45857557, Final residual = 0.025311302, No Iterations 1
maxResidual: 0.58431649  convergence criterion: 1e-05
Solving for solid region stahl
DICPCG:  Solving for T, Initial residual = 0.28665699, Final residual = 0.0088383441, No Iterations 3
Min/max T:573.13932 573.15732
maxResidual: 0.28665699  convergence criterion: 0
Solving for solid region nickel
DICPCG:  Solving for T, Initial residual = 0.38683709, Final residual = 0.02003107, No Iterations 3
Min/max T:573.14168 573.16846
maxResidual: 0.38683709  convergence criterion: 0
ExecutionTime = 209.82 s  ClockTime = 215 s
Time = 4
 
Solving for fluid region air
DILUPBiCG:  Solving for Ux, Initial residual = 0.24084048, Final residual = 0.004915614, No Iterations 2
DILUPBiCG:  Solving for Uy, Initial residual = 0.18115566, Final residual = 0.0053951585, No Iterations 2
DILUPBiCG:  Solving for Uz, Initial residual = 0.27080402, Final residual = 0.0046470605, No Iterations 2
DILUPBiCG:  Solving for h, Initial residual = 0.37679786, Final residual = 0.012483282, No Iterations 2
Min/max T:438.60355 610.52713
GAMG:  Solving for p_rgh, Initial residual = 0.52030113, Final residual = 0.0028035602, No Iterations 10
time step continuity errors : sum local = 0.34568672, global = -0.030484505, cumulative = 0.04092496
Min/max rho:0.1 1.6017838
DILUPBiCG:  Solving for epsilon, Initial residual = 0.79841535, Final residual = 0.018437522, No Iterations 1
DILUPBiCG:  Solving for k, Initial residual = 0.63095005, Final residual = 0.04504716, No Iterations 1
maxResidual: 0.52030113  convergence criterion: 1e-05
Solving for solid region stahl
DICPCG:  Solving for T, Initial residual = 0.2754991, Final residual = 0.012902121, No Iterations 3
Min/max T:573.13792 573.17359
maxResidual: 0.2754991  convergence criterion: 0
Solving for solid region nickel
DICPCG:  Solving for T, Initial residual = 0.45358473, Final residual = 0.032194137, No Iterations 3
Min/max T:573.12532 573.20601
maxResidual: 0.45358473  convergence criterion: 0
ExecutionTime = 259.62 s  ClockTime = 265 s
Time = 5
 
Solving for fluid region air
DILUPBiCG:  Solving for Ux, Initial residual = 0.40214255, Final residual = 0.017461495, No Iterations 1
DILUPBiCG:  Solving for Uy, Initial residual = 0.35903783, Final residual = 0.019879502, No Iterations 1
DILUPBiCG:  Solving for Uz, Initial residual = 0.29025645, Final residual = 0.022740052, No Iterations 1
DILUPBiCG:  Solving for h, Initial residual = 0.44847993, Final residual = 0.027396802, No Iterations 1
Min/max T:373.08383 608.76047
GAMG:  Solving for p_rgh, Initial residual = 0.5823908, Final residual = 0.0035429198, No Iterations 8
time step continuity errors : sum local = 0.3566107, global = -0.042827788, cumulative = -0.0019028278
Min/max rho:0.1 44.04069
DILUPBiCG:  Solving for epsilon, Initial residual = 0.10788477, Final residual = 0.0036857341, No Iterations 1
DILUPBiCG:  Solving for k, Initial residual = 0.39821838, Final residual = 0.018211054, No Iterations 1
maxResidual: 0.5823908  convergence criterion: 1e-05
Solving for solid region stahl
DICPCG:  Solving for T, Initial residual = 0.21480544, Final residual = 0.0070344644, No Iterations 3
Min/max T:573.13068 573.17775
maxResidual: 0.21480544  convergence criterion: 0
Solving for solid region nickel
DICPCG:  Solving for T, Initial residual = 0.21057009, Final residual = 0.010229285, No Iterations 3
Min/max T:573.10438 573.21747
maxResidual: 0.21057009  convergence criterion: 0
ExecutionTime = 307.3 s  ClockTime = 313 s
Time = 6
 
Solving for fluid region air
DILUPBiCG:  Solving for Ux, Initial residual = 0.40699826, Final residual = 0.0099007285, No Iterations 2
DILUPBiCG:  Solving for Uy, Initial residual = 0.26010932, Final residual = 0.0064237808, No Iterations 2
DILUPBiCG:  Solving for Uz, Initial residual = 0.36677597, Final residual = 0.0046692112, No Iterations 2
DILUPBiCG:  Solving for h, Initial residual = 0.58652006, Final residual = 0.015643329, No Iterations 2
Min/max T:171.31096 643.82848
GAMG:  Solving for p_rgh, Initial residual = 0.53001195, Final residual = 0.0032895079, No Iterations 7
time step continuity errors : sum local = 0.49966026, global = 0.065093024, cumulative = 0.063190196
Min/max rho:0.1 134.89823
DILUPBiCG:  Solving for epsilon, Initial residual = 0.054822687, Final residual = 0.0032112815, No Iterations 1
DILUPBiCG:  Solving for k, Initial residual = 0.21489778, Final residual = 0.015080186, No Iterations 1
maxResidual: 0.58652006  convergence criterion: 1e-05
Solving for solid region stahl
DICPCG:  Solving for T, Initial residual = 0.34935884, Final residual = 0.016915752, No Iterations 3
Min/max T:573.12116 573.16264
maxResidual: 0.34935884  convergence criterion: 0
Solving for solid region nickel
DICPCG:  Solving for T, Initial residual = 0.31412509, Final residual = 0.015406677, No Iterations 3
Min/max T:573.08681 573.19124
maxResidual: 0.31412509  convergence criterion: 0
ExecutionTime = 355.91 s  ClockTime = 362 s
Time = 7
 
Solving for fluid region air
DILUPBiCG:  Solving for Ux, Initial residual = 0.34865031, Final residual = 0.0062356977, No Iterations 2
DILUPBiCG:  Solving for Uy, Initial residual = 0.25374462, Final residual = 0.0071132344, No Iterations 2
DILUPBiCG:  Solving for Uz, Initial residual = 0.43121659, Final residual = 0.0095780306, No Iterations 2
DILUPBiCG:  Solving for h, Initial residual = 0.51742328, Final residual = 0.0037596098, No Iterations 3
Min/max T:-11.06336 643.42224
GAMG:  Solving for p_rgh, Initial residual = 0.53695834, Final residual = 0.004854288, No Iterations 8
time step continuity errors : sum local = 0.53624775, global = -0.027675898, cumulative = 0.035514298
Min/max rho:0.1 41.852515
DILUPBiCG:  Solving for epsilon, Initial residual = 0.076316093, Final residual = 0.0043348835, No Iterations 1
DILUPBiCG:  Solving for k, Initial residual = 0.28067978, Final residual = 0.0025771608, No Iterations 2
maxResidual: 0.53695834  convergence criterion: 1e-05
Solving for solid region stahl
DICPCG:  Solving for T, Initial residual = 0.21874858, Final residual = 0.010378139, No Iterations 3
Min/max T:573.11754 573.15601
maxResidual: 0.21874858  convergence criterion: 0
Solving for solid region nickel
DICPCG:  Solving for T, Initial residual = 0.28197206, Final residual = 0.017627815, No Iterations 3
Min/max T:573.08448 573.16856
maxResidual: 0.28197206  convergence criterion: 0
ExecutionTime = 406.1 s  ClockTime = 413 s
Time = 8
 
Solving for fluid region air
DILUPBiCG:  Solving for Ux, Initial residual = 0.22440566, Final residual = 0.003966875, No Iterations 2
DILUPBiCG:  Solving for Uy, Initial residual = 0.21140103, Final residual = 0.0037420796, No Iterations 2
DILUPBiCG:  Solving for Uz, Initial residual = 0.30890578, Final residual = 0.0057340137, No Iterations 2
DILUPBiCG:  Solving for h, Initial residual = 0.35515006, Final residual = 0.03495484, No Iterations 1

Best Regards,
tH3f0rC3

[tH3f0rC3]

Hi,

is there someone who can help me with that?

Best Regards,
tH3f0rC3

[immortality]

hi.although it has past 2 years.do you remember how you solved the problem?
I have similar trouble with velocity.

[tH3f0rC3]

Hi,

I'm sorry, I don't have the files anymore.
And I don't know how I solved the problem anymore.

However, I hope you will solve the problem.

[Owais Shabbir]

Originally Posted by immortality

hi.although it has past 2 years.do you remember how you solved the problem?
I have similar trouble with velocity.

Hi,

i have run into the same problem but through OFv6. Did you find a solution to your problem?

If you still remember, it would be nice if you could share it.

Thanks

owais