setFields tool does not assign water volume for given mesh.

paka · April 2, 2011, 21:28

Good day to everyone!

I already described my problem in different threat, however, since it is not particularly related to Gmsh, but to setFields tool I post the link to the other thread:
http://www.cfd-online.com/Forums/ope...-possible.html

I hope someone can help me. setFields tool is not assigning the water volume for a given mesh produced with Gmsh. checkMesh does not generate any errors. I'm able to use flattenMesh and refineMesh. No errors are produced, all seems to be fine. However while trying to assign a volume of fluid using setFields command for interFoam solver, the domain is not assigned.

Thanks,
K

jeffchan · June 7, 2012, 04:02

hey ,paka

the format of boxToCell should be box(x_min y_min z_min) (x_max y_max z_max)

the same question can be found in

http://www.cfd-online.com/Forums/ope...ge-fields.html

jeff

best regards

paka · June 7, 2012, 10:17

Many thanks for the follow up. I'm sure it will hep someone else in the future.

Regards,
K

April 2, 2011, 21:28	setFields tool does not assign water volume for given mesh.	#1
paka Senior Member Join Date: Mar 2009 Posts: 225 Rep Power: 18	Good day to everyone! I already described my problem in different threat, however, since it is not particularly related to Gmsh, but to setFields tool I post the link to the other thread: http://www.cfd-online.com/Forums/ope...-possible.html I hope someone can help me. setFields tool is not assigning the water volume for a given mesh produced with Gmsh. checkMesh does not generate any errors. I'm able to use flattenMesh and refineMesh. No errors are produced, all seems to be fine. However while trying to assign a volume of fluid using setFields command for interFoam solver, the domain is not assigned. Thanks, K

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] surface mesh merging problem	everest	ANSYS Meshing & Geometry	44	April 14, 2016 07:41
Moving mesh	Niklas Wikstrom (Wikstrom)	OpenFOAM Running, Solving & CFD	122	June 15, 2014 07:20
mesh missing after export in gambit	morteza08	ANSYS Meshing & Geometry	1	July 26, 2010 02:10
Volume mesh for Fluent.. Hypermesh or TGrid??	mayur	FLUENT	5	June 25, 2010 02:45
[GAMBIT] Placing Specific Mesh Nodes in a Volume Mesh	davisi	ANSYS Meshing & Geometry	0	November 12, 2009 08:44

June 7, 2012, 04:02		#2
jeffchan New Member chenjinnan Join Date: May 2012 Posts: 1 Rep Power: 0	hey ,paka the format of boxToCell should be box(x_min y_min z_min) (x_max y_max z_max) the same question can be found in http://www.cfd-online.com/Forums/ope...ge-fields.html jeff best regards

June 7, 2012, 10:17		#3
paka Senior Member Join Date: Mar 2009 Posts: 225 Rep Power: 18	Many thanks for the follow up. I'm sure it will hep someone else in the future. Regards, K