[kurne]

Dear All
I have installed OpenFOAM 1.5-dev and i have given run under simpleSRFFoam solver but i am getting the strange error after running it.Will somebody help me in solving this error.The error is as follows

/*---------------------------------------------------------------------------*\
| ========= | |
| \\ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \\ / O peration | Version: 1.5-dev |
| \\ / A nd | Revision: exported |
| \\/ M anipulation | Web: http://www.OpenFOAM.org |
\*---------------------------------------------------------------------------*/
Exec : simpleSRFFoam
Date : Mar 21 2011
Time : 10:23:54
Host : ubuntu
PID : 2887
Case : /home/sameer/Bl65340/OF1.5dev/2
nProcs : 1

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time

Create mesh for time = 0

Reading field p



Attempt to cast type patch to type lduInterface

From function refCast<To>(From&)
in file /build/buildd/openfoam-dev-1.5-1726/OpenFOAM-1.5-dev/src/OpenFOAM/lnInclude/typeInfo.H at line 106.

FOAM aborting

Aborted


I am facing such type of error first time.I am waiting for help.Thanks in Advance

[zhaowei]

I have similiar experience before, and it is the problem of boundary condition. Check your boundary condition carefully.

[kurne]

Dear Wei Zhao
I have check my boundary conditions many times but still i am facing the same problem.Will you please elaborate the term "Checking the boundary conditions carefully".
Thanks In Advance.

[zhaowei]

The boundary condition is not only in your "boundary" file. If you run checkMesh and the result is ok, then your boundary file is fine. I think you might need to check your initial condition in 0 folder, especially the p file. Have you run the tutorials for simpleSRFFoam? Is this solver compiled well?

Good luck!

[kurne]

Dear Wei Zhao

Yes i have compile the solver and it is running in the tutorial case.I am also implementing the similar type of problem and i have run in the OpenFOAM 1.7.1 but the problem is only in OpenFOAM 1.5-Dev.

I am still facing the same problem after observing the my initial conditions file and the MESH is ok.

Can Anybody help.

Thanks in advance.

[kurne]

Dear Wei Zhao

I got the solution.Thanks a lot for the help.