Exception en point flottant

thomasse · February 28, 2011, 04:54

Hello

I realize diffrents calcul with OpenFoam on hulll of ship and I have a problem of "Exception en point flottant (core dumped)".

Have you got a solution?

Thanks a lot

alex_rubel · May 11, 2011, 03:10

Which version of OF and which solver are you using ?
I need more details about the flow and the properties of you mesh to help you.
Will help if you can post a checkMesh and your 0 and System Folder

Bernhard · May 11, 2011, 03:37

Also, please give the error messages and some output of the solver.

At least, if they are in French too I cannot help you.

Pla81 · August 9, 2011, 01:50

Hi Foameres,

I need a help. I'a running a turbDymFoam on OF 1.5 and the simulation stops because of Courant Number max: 141.84163.

Courant Number mean: 0.0032354185 max: 141.84163 velocity magnitude: 86683250
deltaT = 9.8152931e-09
GGI pair (GGI_INT, GGI_EXT) : 3.4097586e+09 3.3529672e+09 Diff = -56791406 or 1.665555 %
Time = 4.68963e-05

Initializing the GGI interpolator between master/shadow patches: GGI_INT/GGI_EXT
Evaluation of GGI weighting factors:
Largest slave weighting factor correction : 0.00022623882 average: 0.00014960287
Largest master weighting factor correction: 4.4408921e-16 average: 7.3303187e-17

Exception en point flottant

regards,
Pla.

February 28, 2011, 04:54	Exception en point flottant	#1
thomasse New Member Thomas Join Date: Feb 2011 Location: Brest, Frnace Posts: 1 Rep Power: 0	Hello I realize diffrents calcul with OpenFoam on hulll of ship and I have a problem of "Exception en point flottant (core dumped)". Have you got a solution? Thanks a lot

August 9, 2011, 01:50	Exception en point flottant	#4
Pla81 New Member PLacide Join Date: Jul 2011 Posts: 1 Rep Power: 0	Hi Foameres, I need a help. I'a running a turbDymFoam on OF 1.5 and the simulation stops because of Courant Number max: 141.84163. Courant Number mean: 0.0032354185 max: 141.84163 velocity magnitude: 86683250 deltaT = 9.8152931e-09 GGI pair (GGI_INT, GGI_EXT) : 3.4097586e+09 3.3529672e+09 Diff = -56791406 or 1.665555 % Time = 4.68963e-05 Initializing the GGI interpolator between master/shadow patches: GGI_INT/GGI_EXT Evaluation of GGI weighting factors: Largest slave weighting factor correction : 0.00022623882 average: 0.00014960287 Largest master weighting factor correction: 4.4408921e-16 average: 7.3303187e-17 Exception en point flottant regards, Pla.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
MPI Error - simpleFoam - Floating Point Exception	scott	OpenFOAM Running, Solving & CFD	3	April 13, 2012 17:34
reactingFoam floating point exception	pajofego	OpenFOAM	0	November 6, 2010 18:29
Cannot Open .sim (Floating Point Exception)	trex930	STAR-CCM+	1	July 30, 2010 07:51
Floating point exception error with small DeltaT	rassilon	OpenFOAM Running, Solving & CFD	19	September 2, 2009 08:39
[Gmsh] Gmsh and samplesurface	touf	OpenFOAM Meshing & Mesh Conversion	2	December 10, 2007 03:27

May 11, 2011, 03:10		#2
alex_rubel New Member Alexandre Rubel Join Date: Dec 2010 Location: Launceston, Tasmania AUSTRALIA Posts: 28 Rep Power: 16	Which version of OF and which solver are you using ? I need more details about the flow and the properties of you mesh to help you. Will help if you can post a checkMesh and your 0 and System Folder

May 11, 2011, 03:37		#3
Bernhard Senior Member Bernhard Join Date: Sep 2009 Location: Delft Posts: 790 Rep Power: 22	Also, please give the error messages and some output of the solver. At least, if they are in French too I cannot help you.