how the interface between 2 solid regions is treater in chtMultiRegionFoam ?

Cyp · June 16, 2010, 10:44

Hi!

I am interested in the chtMultiRegionFoam solver. In fact I don't need the fluid part of this solver since (for the moment) I only need to simulate the diffusion of fields trough 2 motionless regions.

So in my simulations I only set up 2 solid regions and 0 fluid region.

I wonder how the interface between the 2 solid regions is treated ? Is the solidWallMixedTemperatureCoupled BC is suitable ?

Moreover, I don't understand why the Diffusion coefficient, the density and the heat capacity as considered as variable fields ? If it is really that, it is possible to simulate my problem with the laplacianFoam solver and a diffusion coefficient field whom the value depends on the region ?

Thank for your clarifications

Cyp · June 16, 2010, 17:03

Ok! I have a answer to my questions ! I just modified the laplacianFoam solver : I declared the diffusivity DT as a variable scalarField and then I patched this field with different value according to the region.

It is an easiest way than the chtMultiRegionFoam solver and it works well for my applications.

dibyendu · March 15, 2023, 06:35

Quote:

Originally Posted by Cyp

Ok! I have a answer to my questions ! I just modified the laplacianFoam solver : I declared the diffusivity DT as a variable scalarField and then I patched this field with different value according to the region.

It is an easiest way than the chtMultiRegionFoam solver and it works well for my applications.

Did you verify your result ??

June 16, 2010, 10:44	how the interface between 2 solid regions is treater in chtMultiRegionFoam ?	#1
Cyp Senior Member Cyprien Join Date: Feb 2010 Location: Stanford University Posts: 299 Rep Power: 18	Hi! I am interested in the chtMultiRegionFoam solver. In fact I don't need the fluid part of this solver since (for the moment) I only need to simulate the diffusion of fields trough 2 motionless regions. So in my simulations I only set up 2 solid regions and 0 fluid region. I wonder how the interface between the 2 solid regions is treated ? Is the solidWallMixedTemperatureCoupled BC is suitable ? Moreover, I don't understand why the Diffusion coefficient, the density and the heat capacity as considered as variable fields ? If it is really that, it is possible to simulate my problem with the laplacianFoam solver and a diffusion coefficient field whom the value depends on the region ? Thank for your clarifications

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wind turbine simulation	Saturn	CFX	60	July 17, 2024 06:45
RPM in Wind Turbine	Pankaj	CFX	9	November 23, 2009 05:05
Convective Heat Transfer - Heat Exchanger	Mark	CFX	6	November 15, 2004 16:55
Replace periodic by inlet-outlet pair	lego	CFX	3	November 5, 2002 21:09
CFX4.3 -build analysis form	Chie Min	CFX	5	July 13, 2001 00:19

June 16, 2010, 17:03		#2
Cyp Senior Member Cyprien Join Date: Feb 2010 Location: Stanford University Posts: 299 Rep Power: 18	Ok! I have a answer to my questions ! I just modified the laplacianFoam solver : I declared the diffusivity DT as a variable scalarField and then I patched this field with different value according to the region. It is an easiest way than the chtMultiRegionFoam solver and it works well for my applications.