Paraview doesn't show anything

DrBrain · March 23, 2010, 17:00

Hi,

I just installed OpenFoam on my Ubuntu 9.10 system. Everything works fine except Paraview.
It opens up and I can select the case- files, but in the view- panel it only shows the background color and not the specified data. I can see the coordinate system in the lower left corner and the axes at the beginning. I can move the space around with the mouse, then the axes in the middle disappear and the coordinate system moves, but nothing else happens.

I did not install the entire qt environment, I just installed the libqt4-dev package, as it was specified in the OpenFoam Installation instructions. May this cause my problem?

I hope someone can help me. Thanks!

Thomas Baumann · March 24, 2010, 05:55

Hi
convert your data to the VTK-format with the command "foamToVTK"
then open paraview with "paraview"
open the converted data.

Hope that could help you.
Regards Thomas

DrBrain · April 7, 2010, 05:31

Thank you, it worked!!
Took me a while to test it, though

soeren87 · April 7, 2010, 08:41

try to type "export LC_ALL=C" before opening paraview with "paraFoam"

jiejie · July 8, 2010, 01:14

Quote:

Originally Posted by Thomas Baumann

Hi
convert your data to the VTK-format with the command "foamToVTK"
then open paraview with "paraview"
open the converted data.

Hope that could help you.
Regards Thomas

Hi Thomas

In my case, paraview doesn't show anything even after I convert data to VTK format. It just show any empty block in the display panel.

Thanks

m.nichols19 · July 8, 2010, 12:43

Hello, jiejie

What solver are you using? Is it a tutorial case?

best regards,
Matt

jiejie · July 8, 2010, 19:43

Quote:

Originally Posted by m.nichols19

Hello, jiejie

What solver are you using? Is it a tutorial case?

best regards,
Matt

Hi Matt, I am using pisoFoam.

The problem is fixed.

See http://www.cfd-online.com/Forums/ope...y-problem.html

Cheers

leonardo13 · April 5, 2020, 16:24

Are you sure that you can load data through the properties panel? . If not go to View->properties panel and load the data you want from your case.

March 23, 2010, 17:00	Paraview doesn't show anything	#1
DrBrain New Member Robert Schelling Join Date: Mar 2010 Posts: 2 Rep Power: 0	Hi, I just installed OpenFoam on my Ubuntu 9.10 system. Everything works fine except Paraview. It opens up and I can select the case- files, but in the view- panel it only shows the background color and not the specified data. I can see the coordinate system in the lower left corner and the axes at the beginning. I can move the space around with the mouse, then the axes in the middle disappear and the coordinate system moves, but nothing else happens. I did not install the entire qt environment, I just installed the libqt4-dev package, as it was specified in the OpenFoam Installation instructions. May this cause my problem? I hope someone can help me. Thanks!

March 24, 2010, 05:55		#2
Thomas Baumann Senior Member Join Date: Apr 2009 Location: Karlsruhe, Germany Posts: 104 Rep Power: 17	Hi convert your data to the VTK-format with the command "foamToVTK" then open paraview with "paraview" open the converted data. Hope that could help you. Regards Thomas Last edited by Thomas Baumann; March 24, 2010 at 11:09.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
paraFoam reader for OpenFOAM 1.6	smart	OpenFOAM Installation	13	November 16, 2009 22:41
[OpenFOAM] ParaView 340 experience Does not show animation	eno	ParaView	10	November 14, 2008 13:38
Paraview installation troubles	jjhall	OpenFOAM Installation	3	April 17, 2008 13:59
[OpenFOAM] ParaView patch visualisation error in Development version	philippose	ParaView	17	March 26, 2007 07:45
[OpenFOAM] Paraview doesnbt show up	kim	ParaView	3	September 21, 2005 23:51

April 7, 2010, 05:31		#3
DrBrain New Member Robert Schelling Join Date: Mar 2010 Posts: 2 Rep Power: 0	Thank you, it worked!! Took me a while to test it, though

April 7, 2010, 08:41		#4
soeren87 New Member Sören Join Date: Oct 2009 Location: Bremen, Germany Posts: 15 Rep Power: 17	try to type "export LC_ALL=C" before opening paraview with "paraFoam"

July 8, 2010, 12:43		#6
m.nichols19 Member Join Date: Jun 2010 Posts: 31 Rep Power: 16	Hello, jiejie What solver are you using? Is it a tutorial case? best regards, Matt

April 5, 2020, 16:24		#8
leonardo13 New Member Leonardo Jesus Miranda MIyazaki Join Date: Jan 2018 Posts: 5 Rep Power: 8	Are you sure that you can load data through the properties panel? . If not go to View->properties panel and load the data you want from your case.