paraFoam running problem

Aleksey_R · November 24, 2009, 12:52

Hello Colleagues.

I have a problem with ParaView running. When I try to maximize ParaView window OS hangs up. And then I can do nothing. I even can't close any application running.
Also, I can't visualize anything in ParaView. I can see neither mesh nor pressure maps I've counted in OpenFOAM. ParaView starts, opens OpenFOAM cases but visualizes nothing.
My system is 64-bit Suse 11.0. I've installed Qt-4.3.5 and recompiled ParaView and PV3FoamReader using Qt-4.3.5 but it didn't help me.

Please help me with my problem.

Best regards, Aleksey.

wyldckat · November 25, 2009, 08:53

Greetings Aleksey,

That looks to me either one of two possible problems:
- You have Compiz or Beryl running (3D accelerated window management, enabling some sweet woobly and shinny interface)
- The other possibility is your graphic card isn't properly installed in OpenSUSE... if you have an ATI card, check this post. For others, try searching it's name on this forum.

In case your OS seems to lock up, try Ctrl+Alt+F2 or other F's, to get a console window/terminal. F7 is the X terminal (windows and graphics). In case this also doesn't work, it is likely to be your graphic card's driver not correctly installed.

Also, try using the pre-built version of Paraview, to open VTK files. Use foamToVTK to export your case to VTK.

Hope these tips will help you fix the problem.
Best regards,
Bruno

Aleksey_R · November 27, 2009, 19:18

I've switched on 3D-acceleration in SaX2 and my ParaView is working! Although, I have to use foamToVTK + paraview instead of ParaFoam.

Thanks a lot, Bruno!

November 24, 2009, 12:52	paraFoam running problem	#1
Aleksey_R Member Aleksey Rukhlenko Join Date: Nov 2009 Location: Moscow Posts: 55 Rep Power: 17	Hello Colleagues. I have a problem with ParaView running. When I try to maximize ParaView window OS hangs up. And then I can do nothing. I even can't close any application running. Also, I can't visualize anything in ParaView. I can see neither mesh nor pressure maps I've counted in OpenFOAM. ParaView starts, opens OpenFOAM cases but visualizes nothing. My system is 64-bit Suse 11.0. I've installed Qt-4.3.5 and recompiled ParaView and PV3FoamReader using Qt-4.3.5 but it didn't help me. Please help me with my problem. Best regards, Aleksey.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problem with running chtMultiRegionFoam after using setSet utility	Victor	OpenFOAM	12	March 24, 2023 01:01
error while running paraFoam!	padmanathan	OpenFOAM	9	October 13, 2009 06:17
Statically Compiling OpenFOAM Issues	herzfeldd	OpenFOAM Installation	21	January 6, 2009 10:38
OpenFOAM15 installables are incomplete problem with paraFoam	tryingof	OpenFOAM Bugs	17	December 7, 2008 05:41
Kubuntu uses dash breaks All scripts in tutorials	platopus	OpenFOAM Bugs	8	April 15, 2008 08:52

November 25, 2009, 08:53		#2
wyldckat Retired Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 10,981 Blog Entries: 45 Rep Power: 128	Greetings Aleksey, That looks to me either one of two possible problems: - You have Compiz or Beryl running (3D accelerated window management, enabling some sweet woobly and shinny interface) - The other possibility is your graphic card isn't properly installed in OpenSUSE... if you have an ATI card, check this post. For others, try searching it's name on this forum. In case your OS seems to lock up, try Ctrl+Alt+F2 or other F's, to get a console window/terminal. F7 is the X terminal (windows and graphics). In case this also doesn't work, it is likely to be your graphic card's driver not correctly installed. Also, try using the pre-built version of Paraview, to open VTK files. Use foamToVTK to export your case to VTK. Hope these tips will help you fix the problem. Best regards, Bruno

November 27, 2009, 19:18		#3
Aleksey_R Member Aleksey Rukhlenko Join Date: Nov 2009 Location: Moscow Posts: 55 Rep Power: 17	I've switched on 3D-acceleration in SaX2 and my ParaView is working! Although, I have to use foamToVTK + paraview instead of ParaFoam. Thanks a lot, Bruno!