[pramodopen4foam]

Hi friends,
I am trying with a tank model with rotating propeller in it, I have got meshes from fluent and successfully converted that to foam Mesh, now my question is,

1) How to merge this 2 different meshes so that after merging I have to give rotation to propeller as explained in GGI tutorial,

2) Is stitch mesh command required after merging , since I have to rotate my propeller mesh,

can anyone help me with this,
I am very new to OpenFoam,
Thanks in advance

[Simon Lapointe]

Hi,

1) Once you have your two meshes in foam format, you need to place them in two different case folders like "master" and "propeller". Then you use the command "mergeMeshes . master . propeller". This will a create a new timestep in the master folder with the complete mesh.

2) You don't need to use stitchMesh. Once you set up the boundary conditions properly, you can give motion to your mesh using the dynamicFvMesh "mixerGgiFvMesh" (if you want to give a constant angular velocity). You'll need to specifiy the moving and static boundaries you defined earlier.

Hope that helps

[pramodopen4foam]

Originally Posted by Simon Lapointe

Hi,

1) Once you have your two meshes in foam format, you need to place them in two different case folders like "master" and "propeller". Then you use the command "mergeMeshes . master . propeller". This will a create a new timestep in the master folder with the complete mesh.

2) You don't need to use stitchMesh. Once you set up the boundary conditions properly, you can give motion to your mesh using the dynamicFvMesh "mixerGgiFvMesh" (if you want to give a constant angular velocity). You'll need to specifiy the moving and static boundaries you defined earlier.

Hope that helps

Thanks for your kind response Simon, will try that now ,

[pramodopen4foam]

tried with the commands MergeMeshes .body .attachment ,
I landed in error like "Wrong number of arguments, expected 4 found 2" ,
I know its because of Path error but mine is very simple both(body n attachment mesh casses) are in a folder in Desktop.
Thanks in advance,

Pramod

[waynezw0618]

Hi
i want to know if the GGI can run in parallel in OpenFOAM 1.6 (not 1.6.x)

3ks
wayne

[Simon Lapointe]

Originally Posted by pramodopen4foam

tried with the commands MergeMeshes .body .attachment ,
I landed in error like "Wrong number of arguments, expected 4 found 2" ,
I know its because of Path error but mine is very simple both(body n attachment mesh casses) are in a folder in Desktop.
Thanks in advance,

Pramod

Try with a space between "." and "body" like ". body"

[Simon Lapointe]

Originally Posted by waynezw0618

Hi
i want to know if the GGI can run in parallel in OpenFOAM 1.6 (not 1.6.x)

3ks
wayne

I don't think GGI is available in OpenFOAM 1.6. It is available in 1.5-dev and it can run in parallel.

[pramodopen4foam]

Originally Posted by Simon Lapointe

Try with a space between "." and "body" like ". body"

Thanks Simon again,
this time providing space worked, but ended in error ,


"Writing combined mesh to 0.1
Patch face has got a neighbour. Patch ID: 6. This is not allowed.
Patch face has got a neighbour. Patch ID: 6. This is not allowed.
Face: 3(50622 26674 27282) masterPointID:-1 masterEdgeID:-1 masterFaceID:-1 patchID:6 owner:109183 neighbour:109178#0 Foam::error:rintStack(Foam::Ostream&) in "/home/baburao/OpenFOAM/OpenFOAM-1.5/lib/linux64GccDPOpt/libOpenFOAM.so"
#1 Foam::error::abort() in "/home/baburao/OpenFOAM/OpenFOAM-1.5/lib/linux64GccDPOpt/libOpenFOAM.so"
#2 Foam:olyAddFace:olyAddFace(Foam::face const&, int, int, int, int, int, bool, int, int, bool) in "/home/baburao/OpenFOAM/OpenFOAM-1.5/applications/bin/linux64GccDPOpt/mergeMeshes"
#3 Foam::mergePolyMesh::addMesh(Foam:olyMesh const&) in "/home/baburao/OpenFOAM/OpenFOAM-1.5/applications/bin/linux64GccDPOpt/mergeMeshes"
#4 main in "/home/baburao/OpenFOAM/OpenFOAM-1.5/applications/bin/linux64GccDPOpt/mergeMeshes"
#5 __libc_start_main in "/lib/libc.so.6"
#6 Foam::regIOobject::write() const in "/home/baburao/OpenFOAM/OpenFOAM-1.5/applications/bin/linux64GccDPOpt/mergeMeshes"


From function polyAddFace
(
const face& f,
const label owner, const label neighbour,
const label masterPointID,
const label masterEdgeID,
const label masterFaceID,
const bool flipFaceFlux,
const label patchID,
const label zoneID,
const bool zoneFlip
)
in file /home/dm2/henry/OpenFOAM/OpenFOAM-dev/src/dynamicMesh/lnInclude/polyAddFace.H at line 246.

FOAM aborting"

My question was can we successfully merge meshes in OpenFoam-1.5?
I have attached my 2 master n slave boundary files below, If possible please see this,

again thanks you very much,
Pramod

[Simon Lapointe]

Originally Posted by pramodopen4foam

Thanks Simon again,
this time providing space worked, but ended in error ,


"Writing combined mesh to 0.1
Patch face has got a neighbour. Patch ID: 6. This is not allowed.
Patch face has got a neighbour. Patch ID: 6. This is not allowed.
Face: 3(50622 26674 27282) masterPointID:-1 masterEdgeID:-1 masterFaceID:-1 patchID:6 owner:109183 neighbour:109178#0 Foam::error:rintStack(Foam::Ostream&) in "/home/baburao/OpenFOAM/OpenFOAM-1.5/lib/linux64GccDPOpt/libOpenFOAM.so"
#1 Foam::error::abort() in "/home/baburao/OpenFOAM/OpenFOAM-1.5/lib/linux64GccDPOpt/libOpenFOAM.so"
#2 Foam:olyAddFace:olyAddFace(Foam::face const&, int, int, int, int, int, bool, int, int, bool) in "/home/baburao/OpenFOAM/OpenFOAM-1.5/applications/bin/linux64GccDPOpt/mergeMeshes"
#3 Foam::mergePolyMesh::addMesh(Foam:olyMesh const&) in "/home/baburao/OpenFOAM/OpenFOAM-1.5/applications/bin/linux64GccDPOpt/mergeMeshes"
#4 main in "/home/baburao/OpenFOAM/OpenFOAM-1.5/applications/bin/linux64GccDPOpt/mergeMeshes"
#5 __libc_start_main in "/lib/libc.so.6"
#6 Foam::regIOobject::write() const in "/home/baburao/OpenFOAM/OpenFOAM-1.5/applications/bin/linux64GccDPOpt/mergeMeshes"


From function polyAddFace
(
const face& f,
const label owner, const label neighbour,
const label masterPointID,
const label masterEdgeID,
const label masterFaceID,
const bool flipFaceFlux,
const label patchID,
const label zoneID,
const bool zoneFlip
)
in file /home/dm2/henry/OpenFOAM/OpenFOAM-dev/src/dynamicMesh/lnInclude/polyAddFace.H at line 246.

FOAM aborting"

My question was can we successfully merge meshes in OpenFoam-1.5?
I have attached my 2 master n slave boundary files below, If possible please see this,

again thanks you very much,
Pramod

Yes, it is possible to merge meshes in OpenFOAM 1.5. However, I see from your error messages that you seem to be using OpenFOAM 1.5 and not 1.5-dev. If that's the case you won't be able to use GGI since it is not available in 1.5.

Concerning the mergeMeshes problems, I can't tell the problem from your boundary files.

[pramodopen4foam]

Hi friends as I suggested mergeMeshes works in OF-1.6, but once simulation is complete we cannot see fluid passing through second domain or propeller mesh,
its clearly indicated, is GGI interface working, does propeller rotote can anyone help me in implementing GGI mesh, I ll attach my merged mesh as well as jpg of result file and DymMeshDict,
Thanks in advance,
Pramod

[pramodopen4foam]

Originally Posted by Simon Lapointe

Yes, it is possible to merge meshes in OpenFOAM 1.5. However, I see from your error messages that you seem to be using OpenFOAM 1.5 and not 1.5-dev. If that's the case you won't be able to use GGI since it is not available in 1.5.

Concerning the mergeMeshes problems, I can't tell the problem from your boundary files.

Thanks for your reponse again Simon,
Is GGI available in OpenFoam.1-6 ???

Thanks,
Pramod.

[Simon Lapointe]

Originally Posted by pramodopen4foam

Thanks for your reponse again Simon,
Is GGI available in OpenFoam.1-6 ???

Thanks,
Pramod.

As I mentionned in a previous post, GGI is not available in OpenFOAM 1.6. At the moment, it is only available in 1.5-dev.

[pramodopen4foam]

Originally Posted by Simon Lapointe

As I mentionned in a previous post, GGI is not available in OpenFOAM 1.6. At the moment, it is only available in 1.5-dev.

Thank you very Much Simon,
Can we be in contact so that you can help to know this software well ,
Anticipating for your kind reply,

[NickG]

Originally Posted by pramodopen4foam

Hi friends as I suggested mergeMeshes works in OF-1.6, but once simulation is complete we cannot see fluid passing through second domain or propeller mesh,
its clearly indicated, is GGI interface working, does propeller rotote can anyone help me in implementing GGI mesh, I ll attach my merged mesh as well as jpg of result file and DymMeshDict,
Thanks in advance,
Pramod

Hi Pramod

Did you find the answer to this problem. I have the same problem when I try to run in parallel but not on one cpu.

Cheers
Nick