Write Info directly to clipboard

braennstroem · July 14, 2008, 05:11

Hi,

does anyone know, how to 'pipe' certain Info lines from the application directly to the clipboard at startup? It would be nice, to paste some information directly into an emacs simulation database.

Fabian

olesen · July 14, 2008, 05:44

Fabian,

IMO you really don't want to start messing about with X11 buffer at all (ever).
Have you tried anything with the built-in job information? Starting from foamPrintJobs, you should be able to get what you want.

braennstroem · July 14, 2008, 05:52

Hi Mark,

oh, I did not think it would mess to much up and hoped that something like /dev/null for the clipboard exists...

I would like to extract information like the used turbulence models, time step size, schemes,... to a database.
A simple script solution should do the job as well, but an integrated openfoam approach would have been much faster. Thanks!

Fabian

olesen · July 14, 2008, 07:43

Hi Fabian,

Quote:

I would like to extract information like the used turbulence models, time step size, schemes,... to a database.

From some of these you might be able to write a corresponding function object, but I don't know of general solution.

July 14, 2008, 05:11	Hi, does anyone know, how t	#1
braennstroem Senior Member Fabian Braennstroem Join Date: Mar 2009 Posts: 407 Rep Power: 19	Hi, does anyone know, how to 'pipe' certain Info lines from the application directly to the clipboard at startup? It would be nice, to paste some information directly into an emacs simulation database. Fabian

July 14, 2008, 05:44	Fabian, IMO you really don'	#2
olesen Senior Member Mark Olesen Join Date: Mar 2009 Location: https://olesenm.github.io/ Posts: 1,715 Rep Power: 40	Fabian, IMO you really don't want to start messing about with X11 buffer at all (ever). Have you tried anything with the built-in job information? Starting from foamPrintJobs, you should be able to get what you want.

July 14, 2008, 05:52	Hi Mark, oh, I did not thin	#3
braennstroem Senior Member Fabian Braennstroem Join Date: Mar 2009 Posts: 407 Rep Power: 19	Hi Mark, oh, I did not think it would mess to much up and hoped that something like /dev/null for the clipboard exists... I would like to extract information like the used turbulence models, time step size, schemes,... to a database. A simple script solution should do the job as well, but an integrated openfoam approach would have been much faster. Thanks! Fabian

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
some info please	andrea	Main CFD Forum	2	October 9, 2008 18:10
Can you make OpenFOAM use ssh directly rather than telnet	york	OpenFOAM Installation	5	November 13, 2006 05:12
[Other] Importing a mesh in system memory using C directly to OpenFoam Solvers	juanduque	OpenFOAM Meshing & Mesh Conversion	1	August 10, 2006 05:15
import gambit .neu directly to CFX?	jemteo	CFX	2	June 6, 2006 16:00
Is it possible to specify fields directly	evgenii	OpenFOAM Pre-Processing	2	November 24, 2005 05:55