[DheaGruv]

so i work on my final task using an openFoam and im still not familiar about this. So im running my task using DTCHulWave tutorial and end up my tutorial solver can run perfectly. And then i tried to change the geometry(object) to the new one that i designe in the autodesk inventor. And after running this solver i got some error message and its causing my new object didnt recognize by system whe i try to running the solver.




/*---------------------------------------------------------------------------*\
========= |
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
\\ / O peration | Website: https://openfoam.org
\\ / A nd | Version: 10
\\/ M anipulation |
\*---------------------------------------------------------------------------*/
Build : 10-c4cf895ad8fa
Exec : interFoam -parallel
Date : Nov 02 2023
Time : 21:57:12
Host : "dheaputri-IdeaPad-5-14ARE05"
PID : 14056
I/O : uncollated
Case : /home/dheaputri/Documents/coba_openfoam/DTCHullWave
nProcs : 6
Slaves :
5
(
"dheaputri-IdeaPad-5-14ARE05.14057"
"dheaputri-IdeaPad-5-14ARE05.14058"
"dheaputri-IdeaPad-5-14ARE05.14059"
"dheaputri-IdeaPad-5-14ARE05.14060"
"dheaputri-IdeaPad-5-14ARE05.14061"
)

Pstream initialised with:
floatTransfer : 0
nProcsSimpleSum : 0
commsType : nonBlocking
polling iterations : 0
sigFpe : Enabling floating point exception trapping (FOAM_SIGFPE).
fileModificationChecking : Monitoring run-time modified files using timeStampMaster (fileModificationSkew 10)
allowSystemOperations : Allowing user-supplied system call operations

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time

Create mesh for time = 0

Selecting fvMeshMover motionSolver
Selecting motion solver: rigidBodyMotion
Selecting rigidBodySolver Newmark
--> FOAM Warning :
From function Foam::labelHashSet Foam:olyBoundaryMesh:atchSet(const Foam::UList<Foam::wordRe>&, bool, bool) const
in file meshes/polyMesh/polyBoundaryMesh/polyBoundaryMesh.C at line 834
Cannot find any patch or group names matching hull

PIMPLE: No convergence criteria found






CAN YOU PLEASE HELP ME...

[fusie]

hiiiiii

im trying to run DTCHullwave tutorial.i have some doubts on this..how you run the simulation? by Allrun or seperate command for each step?can you tell me how to enable setWaves in this?
blockMesh,surfaceFeatureExtract,topoSet -dict system/topoSetDict.1-6,refineMesh -overwrite,snappyHexMesh -overwrite .
im stuck after this command which is the command i have to use to enable waves ?

please help me to run the simulation