 |
 |
 |
|
|
|
[Sponsors] | ||||
November 29, 2022, 08:06
|
Overset Mesh Boundary Overwrite
|
#1 |
|
New Member
Manuel Zeitler
Join Date: Nov 2022
Posts: 2
Rep Power: 0  |
Hello,
I am pretty new to OpenFoam and am currently experimenting with the Overset Mesh/OverInterDyMFoam Solver. In my setup I encountered a problem when different boundary conditions of the background and overset Mesh overlap (more or less perfectly). In such cases does the background Mesh simply overwrite the overset Mesh in the overlapping regions? My test case can be found on github: https://github.com/ZeitM/OversetTest This test case has no practical use and the overset Mesh is just used to test the solver. I would appreciate any further information on this problem. |
|
|
|
|
 |
| Tags |
| overinterdymfoam, overset mesh |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| overset mesh boundary conditions leading to solution singularity | Dr T | OpenFOAM Running, Solving & CFD | 0 | October 24, 2022 14:37 |
| Radiation in semi-transparent media with surface-to-surface model? | mpeppels | CFX | 11 | August 22, 2019 08:30 |
| CFD analaysis of Pelton turbine | amodpanthee | CFX | 31 | April 19, 2018 19:02 |
| Wrong flow in ratating domain problem | Sanyo | CFX | 17 | August 15, 2015 07:20 |
| [Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues | michele | OpenFOAM Meshing & Mesh Conversion | 2 | July 15, 2005 05:15 |
Linear Mode
