OpenFoam + Docker. Same case different results.

Ivangzp · December 24, 2020, 15:41

Hello everyone,

This is my first post so, sorry if I don't explain my problem properly.

I'm trying to validate a well-known case, turbulent flow over NACA0012. Information of the validation ca be found here: https://turbmodels.larc.nasa.gov/naca0012_val.html

I simulated properly the case with the version of OpenFoam v2006, obtaining succefull results. I can say that I validated the case because I got accuracy values for Cl and Cd for differents angles of attacks (0º, 3º, 6º, 9º, 12º and 15º). I did that with two different turbulence models (RAS-Spalart Allmaras and RAS-KwSST) using the solver simpleFoam.

The problem is the following one. I tried to run the SAME case with a version of OpenFoam installed by means of Docker. (IN THE SAME LAPTOP).

Both are supposed to be the same version but the results are differents (Relative error 30 %) and it isn't related with the time of convergence.

Has anyone suspect where can be the problem?

If someone is interested in look over the code, the case for AoA 3 degrees is here:
https://drive.google.com/file/d/1p2P...ew?usp=sharing

The case is ready to run with simpleFoam.

Thank for your time.

Ivangzp · December 28, 2020, 19:51

Anyone can help me or give any recommendation?

Ivangzp · December 30, 2020, 13:39

Anyone ? ?

Ivangzp · January 1, 2021, 20:51

Help Please!

December 24, 2020, 15:41	OpenFoam + Docker. Same case different results.	#1
Ivangzp New Member Ivan Join Date: Sep 2020 Posts: 15 Rep Power: 6	Hello everyone, This is my first post so, sorry if I don't explain my problem properly. I'm trying to validate a well-known case, turbulent flow over NACA0012. Information of the validation ca be found here: https://turbmodels.larc.nasa.gov/naca0012_val.html I simulated properly the case with the version of OpenFoam v2006, obtaining succefull results. I can say that I validated the case because I got accuracy values for Cl and Cd for differents angles of attacks (0º, 3º, 6º, 9º, 12º and 15º). I did that with two different turbulence models (RAS-Spalart Allmaras and RAS-KwSST) using the solver simpleFoam. The problem is the following one. I tried to run the SAME case with a version of OpenFoam installed by means of Docker. (IN THE SAME LAPTOP). Both are supposed to be the same version but the results are differents (Relative error 30 %) and it isn't related with the time of convergence. Has anyone suspect where can be the problem? If someone is interested in look over the code, the case for AoA 3 degrees is here: https://drive.google.com/file/d/1p2P...ew?usp=sharing The case is ready to run with simpleFoam. Thank for your time. Last edited by Ivangzp; December 26, 2020 at 16:08.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OpenFOAM 4.0 Released	CFDFoundation	OpenFOAM Announcements from OpenFOAM Foundation	2	October 6, 2017 06:40
[Other] Installation of OpenFOAM: Docker or not Docker?	zt49	OpenFOAM Installation	2	December 22, 2016 11:38
Exporting mesh for an OpenFOAM chtMultiRegion case	akrasemann	enGrid	14	October 4, 2015 17:26
Superlinear speedup in OpenFOAM 13	msrinath80	OpenFOAM Running, Solving & CFD	18	March 3, 2015 06:36
Cross-compiling OpenFOAM 1.7.0 on Linux for Windows 32 and 64bits with Mingw-w64	wyldckat	OpenFOAM Announcements from Other Sources	3	September 8, 2010 07:25

December 28, 2020, 19:51		#2
Ivangzp New Member Ivan Join Date: Sep 2020 Posts: 15 Rep Power: 6	Anyone can help me or give any recommendation?

December 30, 2020, 13:39		#3
Ivangzp New Member Ivan Join Date: Sep 2020 Posts: 15 Rep Power: 6	Anyone ? ?

January 1, 2021, 20:51		#4
Ivangzp New Member Ivan Join Date: Sep 2020 Posts: 15 Rep Power: 6	Help Please!