Model two solids in sedfoam with different properties

JoostLinthorst · May 8, 2020, 06:32

Hey guys,
I am working on a simulation using the sedfoam_rbgh solver. The simulation consists of a sediment bed and water. I am trying to simulate an object falling through the water onto the sediment bed. The object that I would like to simulate has different properties to the sediment and the water.

My question: How can I implement the properties of this other solid which is not one of the two phases in the simulation?

Thanks in advance,
Joost

HPE · May 8, 2020, 07:29

May be asking this question directly to sedFoam maintainers may help, who are the most familiar with the topic:

This is their repo: https://github.com/SedFoam/sedfoam

This is the issue tracker: https://github.com/SedFoam/sedfoam/issues

Or better asking in the community contributors page: https://www.cfd-online.com/Forums/op...contributions/

Hope you find the answer.

May 8, 2020, 06:32	Model two solids in sedfoam with different properties	#1
JoostLinthorst New Member Joost Linthorst Join Date: May 2020 Posts: 8 Rep Power: 6	Hey guys, I am working on a simulation using the sedfoam_rbgh solver. The simulation consists of a sediment bed and water. I am trying to simulate an object falling through the water onto the sediment bed. The object that I would like to simulate has different properties to the sediment and the water. My question: How can I implement the properties of this other solid which is not one of the two phases in the simulation? Thanks in advance, Joost

May 8, 2020, 07:29		#2
HPE Senior Member Herpes Free Engineer Join Date: Sep 2019 Location: The Home Under The Ground with the Lost Boys Posts: 931 Rep Power: 13	May be asking this question directly to sedFoam maintainers may help, who are the most familiar with the topic: This is their repo: https://github.com/SedFoam/sedfoam This is the issue tracker: https://github.com/SedFoam/sedfoam/issues Or better asking in the community contributors page: https://www.cfd-online.com/Forums/op...contributions/ Hope you find the answer. __________________ The OpenFOAM community is the biggest contributor to OpenFOAM: User guide/Wiki-1/Wiki-2/Code guide/Code Wiki/Journal Nilsson/Guerrero/Holzinger/Holzmann/Nagy/Santos/Nozaki/Jasak/Primer Governance Bugs/Features: OpenFOAM (ESI-OpenCFD-Trademark) Bugs/Features: FOAM-Extend (Wikki-FSB) Bugs: OpenFOAM.org How to create a MWE New: Forkable OpenFOAM mirror

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Other] sedFoam: two-phase flow sediment transport model	julienC	OpenFOAM Community Contributions	85	July 25, 2024 19:18
Domain Reference Pressure and mass flow inlet boundary	AdidaKK	CFX	75	August 20, 2018 06:37
Is it possible to define properties of mixture in Mixture model?	AllenZHANG	Fluent Multiphase	0	June 21, 2018 10:11
Question about adaptive timestepping	Guille1811	CFX	25	November 12, 2017 18:38
manualInjection model in sprayFoam	Mentalo	OpenFOAM Running, Solving & CFD	1	April 2, 2014 10:29