Selection of solver

nsreddysrsit · June 23, 2017, 04:18

I wanted to simulate the fluid flow and heat transfer through double pipe heat exchanger. Hot water is flowing through the inner tube and cold water flowing through annulus.
Bc are as follows

Hot water inlet temp is 65 C and cold inlet temp is 30 C , mc is 0.1 kg per s and mh is 0.1 kg per sec . Pressure outlet for both the fluids. Please suggest me the appropriate solver for the above problem. Regards
NSReddy

nsreddysrsit · June 24, 2017, 23:07

Any reference books on conjugate heat transfer to understand algorithms used in openFoam

Thanks and Regards

June 23, 2017, 04:18	Selection of solver	#1
nsreddysrsit Member nsreddy Join Date: Sep 2010 Posts: 40 Rep Power: 16	I wanted to simulate the fluid flow and heat transfer through double pipe heat exchanger. Hot water is flowing through the inner tube and cold water flowing through annulus. Bc are as follows Hot water inlet temp is 65 C and cold inlet temp is 30 C , mc is 0.1 kg per s and mh is 0.1 kg per sec . Pressure outlet for both the fluids. Please suggest me the appropriate solver for the above problem. Regards NSReddy

June 24, 2017, 23:07	books on conjugate heat transfer	#2
nsreddysrsit Member nsreddy Join Date: Sep 2010 Posts: 40 Rep Power: 16	Any reference books on conjugate heat transfer to understand algorithms used in openFoam Thanks and Regards

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Population Balance Modeling (PBM) - Ansys Fluent	chittipo	FLUENT	164	November 18, 2023 12:54
Solver selection for transonic compressor stage in Foam-extend-3.0	dowlee	OpenFOAM Running, Solving & CFD	1	April 16, 2015 14:33
Problem in3D model processing	mebinitap	OpenFOAM	2	December 12, 2014 05:40
3d vof	Smaras	FLUENT	2	February 19, 2013 07:58
Setting a B.C using UserFortran in 4.3	tokai	CFX	10	July 17, 2001 17:25