[dante03]

Hi at all!

I´m a greenhorn regarding openFoam and I've no idea , how to fix this error below.
I use the chtMultiRegionFoam-Solver to simulate the the thermal discharge in wind tunnel.
So I think I need the compressible::alphatWallFunction as patch type for wall function, or not?!?

Do anyone knows what's wrong about my case?!?

PLEASE HELP!!

--> FOAM FATAL IO ERROR: 
Unknown patchField type compressible::alphatWallFunction for patch type wall

Valid patchField types are :
 97
(
MarshakRadiation
MarshakRadiationFixedTemperature
advective
alphatJayatillekeWallFunction
alphatWallFunction
buoyantPressure
calculated
codedFixedValue
codedMixed
compressible::epsilonLowReWallFunction
compressible::epsilonWallFunction
compressible::fWallFunction
compressible::kLowReWallFunction
compressible::kqRWallFunction
compressible::omegaWallFunction
compressible::thermalBaffle1D<hConstSolidThermoPhysics>
compressible::thermalBaffle1D<hExponentialSolidThermoPhysics>
compressible::turbulentHeatFluxTemperature
compressible::turbulentMixingLengthDissipationRateInlet
compressible::turbulentMixingLengthFrequencyInlet
compressible::turbulentTemperatureCoupledBaffleMixed
compressible::turbulentTemperatureRadCoupledMixed
compressible::v2WallFunction
convectiveHeatTransfer
cyclic
cyclicAMI
cyclicSlip
directionMixed
empty
energyJump
energyJumpAMI
externalWallHeatFluxTemperature
fan
fanPressure
fixedEnergy
fixedFluxPressure
fixedGradient
fixedInternalValue
fixedJump
fixedJumpAMI
fixedMean
fixedPressureCompressibleDensity
fixedUnburntEnthalpy
fixedValue
freestream
freestreamPressure
gradientEnergy
gradientUnburntEnthalpy
greyDiffusiveRadiation
greyDiffusiveRadiationViewFactor
inletOutlet
inletOutletTotalTemperature
mapped
mappedField
mappedFixedInternalValue
mappedFixedPushedInternalValue
mixed
mixedEnergy
mixedUnburntEnthalpy
multiphaseFixedFluxPressure
mutLowReWallFunction
mutURoughWallFunction
mutUSpaldingWallFunction
mutUWallFunction
mutkRoughWallFunction
mutkWallFunction
nonuniformTransformCyclic
oscillatingFixedValue
outletInlet
outletMappedUniformInlet
partialSlip
phaseHydrostaticPressure
processor
processorCyclic
rotatingTotalPressure
sliced
slip
symmetryPlane
syringePressure
timeVaryingMappedFixedValue
totalFlowRateAdvectiveDiffusive
totalPressure
totalTemperature
turbulentInlet
turbulentIntensityKineticEnergyInlet
uniformDensityHydrostaticPressure
uniformFixedValue
uniformJump
uniformJumpAMI
uniformTotalPressure
variableHeightFlowRate
wallHeatTransfer
waveSurfacePressure
waveTransmissive
wedge
wideBandDiffusiveRadiation
zeroGradient
)


file: /home/dw/OpenFOAM/dw-2.2.1/run/1/trafo_simulation/0/luft/alphat.boundaryField.wall from line 40 to line 42.

    From function fvPatchField<Type>::New(const fvPatch&, const DimensionedField<Type, volMesh>&, const dictionary&)
    in file /home/opencfd/OpenFOAM/OpenFOAM-2.2.1/src/finiteVolume/lnInclude/fvPatchFieldNew.C at line 136.

FOAM exiting

[hamed_m313]

Hi dante03
you wrote wrong in patch field type.
you should select (write) one of this patch field type.
by