Release load in OpenFOAM

Maimouna · November 4, 2013, 10:16

Dear openfoamers,

I'm looking to get OpenFOAM solver of that case which was attached. I'm looking for get the dynamic solver when release load t>0. Any one have any idea about it?
If any please help me to simulate it.
I'm still new in openfoam to implement such cases. If any one have implementation such that cases, I'm looking for his/her reply.

Many thanks for your help.

julien.decharentenay · November 5, 2013, 01:41

Hi,

You are probably looking for a FSI (Fluid-Structure Interaction) solver? The description is not very clear...

Julien

Maimouna · November 5, 2013, 06:15

Dear Julien,

regarding to the attached figure, I would like to implement the boundary conditions of that case for initial load when t = 0 and then to get the shape when release load for t>0. How could I get that in FSI solver?

Sorry, for bad description but only that I understood from my supervisor when he explained it to me.

If any similar to it help me please to get the answer.

Best regards

julien.decharentenay · November 5, 2013, 07:26

I am still struggling to understand. Is it a mechanical problem, a fluid problem or a coupled fluid and mechanical problem?

Maimouna · November 5, 2013, 07:38

It is coupled mechanical and fluid problem dear.

November 5, 2013, 01:41		#2
julien.decharentenay Senior Member Julien de Charentenay Join Date: Jun 2009 Location: Australia Posts: 231 Rep Power: 18	Hi, You are probably looking for a FSI (Fluid-Structure Interaction) solver? The description is not very clear... Julien __________________ --- Julien de Charentenay

November 5, 2013, 07:26		#4
julien.decharentenay Senior Member Julien de Charentenay Join Date: Jun 2009 Location: Australia Posts: 231 Rep Power: 18	I am still struggling to understand. Is it a mechanical problem, a fluid problem or a coupled fluid and mechanical problem? __________________ --- Julien de Charentenay

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
release of the ERCOFTAC centrifugal pump - Fourth OpenFOAM Workshop	olivier	OpenFOAM	8	October 29, 2018 08:49
Cross-compiling OpenFOAM 1.7.0 on Linux for Windows 32 and 64bits with Mingw-w64	wyldckat	OpenFOAM Announcements from Other Sources	3	September 8, 2010 07:25
How to Install OpenFOAM on 64 Ubuntu 9.04	hansel	OpenFOAM Installation	62	March 19, 2010 15:43
OpenFOAM Install problem	masb	OpenFOAM	3	May 25, 2009 12:32
Critical errors during OpenFoam installation in OpenSuse 11.0	amscosta	OpenFOAM	5	May 1, 2009 15:06

November 5, 2013, 06:15		#3
Maimouna Senior Member ok Join Date: Oct 2013 Posts: 346 Rep Power: 14	Dear Julien, regarding to the attached figure, I would like to implement the boundary conditions of that case for initial load when t = 0 and then to get the shape when release load for t>0. How could I get that in FSI solver? Sorry, for bad description but only that I understood from my supervisor when he explained it to me. If any similar to it help me please to get the answer. Best regards

November 5, 2013, 07:38		#5
Maimouna Senior Member ok Join Date: Oct 2013 Posts: 346 Rep Power: 14	It is coupled mechanical and fluid problem dear.