Differences between 2.2.x and 2.2.1?

phsieh2005 · July 13, 2013, 09:42

Hi,

Are there any differences between 2.2.x and 2.2.1? I am using the up to date 2.2.x. Is there any reason changing over to 2.2.1?

Thanks!

Peiying

wyldckat · July 13, 2013, 17:30

Hi Pei-Ying,

According to this: https://github.com/OpenFOAM/OpenFOAM.../version-2.2.1 - the code for 2.2.1 stops at the 18th of June.
So essentially what this possibly means is that at that time, there was temporary code freeze and (I'm guessing here) probably did several tests to ascertain if the version is stable enough for release. Specially since it looks like it took them almost a month to publish the release

Best regards,
Bruno

phsieh2005 · July 13, 2013, 17:55

ThanksBruno!

I think that I will stay with 2.2.x.

Pei-Ying

July 13, 2013, 09:42	Differences between 2.2.x and 2.2.1?	#1
phsieh2005 Senior Member Pei-Ying Hsieh Join Date: Mar 2009 Posts: 334 Rep Power: 18	Hi, Are there any differences between 2.2.x and 2.2.1? I am using the up to date 2.2.x. Is there any reason changing over to 2.2.1? Thanks! Peiying

July 13, 2013, 17:30		#2
wyldckat Retired Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 10,982 Blog Entries: 45 Rep Power: 128	Hi Pei-Ying, According to this: https://github.com/OpenFOAM/OpenFOAM.../version-2.2.1 - the code for 2.2.1 stops at the 18th of June. So essentially what this possibly means is that at that time, there was temporary code freeze and (I'm guessing here) probably did several tests to ascertain if the version is stable enough for release. Specially since it looks like it took them almost a month to publish the release Best regards, Bruno __________________ OpenFOAM: FAQ \| Getting started Forum: How to get help, to post code/output and forum guide Read this before sending me PM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ESI-OpenCFD releases OpenFOAM® 2.2.1	opencfd	OpenFOAM Announcements from ESI-OpenCFD	2	August 7, 2013 01:26
unactive mesh statics windows for turbogrid 2.2.1	jim	CFX	0	July 1, 2006 19:25

July 13, 2013, 17:55		#3
phsieh2005 Senior Member Pei-Ying Hsieh Join Date: Mar 2009 Posts: 334 Rep Power: 18	ThanksBruno! I think that I will stay with 2.2.x. Pei-Ying