Error with pimpleDyMFoam

samiam1000 · June 11, 2012, 06:52

Dear All,

when I try to run the pimpleDyMFoam I get this error:

Code:

lab@lab-laptop:~/Documenti/cases_OF/OF_case20_mesh_generation/0Deg$ pimpleDyMFoam 
/*---------------------------------------------------------------------------*\
| =========                 |                                                 |
| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
|  \\    /   O peration     | Version:  2.1.0                                 |
|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
|    \\/     M anipulation  |                                                 |
\*---------------------------------------------------------------------------*/
Build  : 2.1.0-0bc225064152
Exec   : pimpleDyMFoam
Date   : Jun 11 2012
Time   : 11:49:48
Host   : "lab-laptop"
PID    : 4105
Case   : /home/lab/Documenti/cases_OF/OF_case20_mesh_generation/0Deg
nProcs : 1
sigFpe : Enabling floating point exception trapping (FOAM_SIGFPE).
fileModificationChecking : Monitoring run-time modified files using timeStampMaster
allowSystemOperations : Disallowing user-supplied system call operations

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time

Create mesh for time = 0

Selecting dynamicFvMesh dynamicMotionSolverFvMesh
Selecting motion solver: displacementSBRStress
Selecting motion diffusion: exponential
Selecting motion diffusion: inverseFaceDistance
Reading field p

Reading field U



--> FOAM FATAL IO ERROR: 
"ill defined primitiveEntry starting at keyword 'boundaryField' on line 23 and ending at line 83"

file: /home/lab/Documenti/cases_OF/OF_case20_mesh_generation/0Deg/0/U at line 83.

    From function primitiveEntry::readEntry(const dictionary&, Istream&)
    in file lnInclude/IOerror.C at line 132.

FOAM exiting

lab@lab-laptop:~/Documenti/cases_OF/OF_case20_mesh_generation/0Deg$

The error is in the U file. Here it is:

Code:

/*--------------------------------*- C++ -*----------------------------------*\
| =========                 |                                                 |
| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
|  \\    /   O peration     | Version:  2.1.0                                 |
|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
|    \\/     M anipulation  |                                                 |
\*---------------------------------------------------------------------------*/
FoamFile
{
    version     2.0;
    format      ascii;
    class       volVectorField;
    location    "0";
    object      U;
}
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //

dimensions      [0 1 -1 0 0 0 0];

internalField   uniform (0 0 0);

boundaryField
{
    wall-volume_internal
    {
        type            fixedValue;i
	value		uniform (0 0 0);
    }
    symmetry_1-volume_external
    {
        type            symmetryPlane;
    }
    symmetry_1-volume_internal
    {
        type            symmetryPlane;
    }
    symmetry_2-volume_external
    {
        type            symmetryPlane;
    }
    symmetry_2-volume_internal
    {
        type            symmetryPlane;
    }
    wall_ext
    {
        type            fixedValue;
	value		uniform (0 0 0);
    }
    honeycomb
    {
        type            fixedValue;
	value		uniform (-1 0 0);
    }
    intake
    {
        type            zeroGradient;
    }
    bottom
    {
        type            fixedValue;
	value		uniform (0 0 0);
    }
    up
    {
        type            fixedValue;
	value		uniform (0 0 0);
    }
    wall_up_int
    {
        type            fixedValue;
	value		uniform (0 0 0);
    }
    door
    {
        type            fixedValue;
	value		uniform (0 0 0);
    }
}


// ************************************************************************* //

Any idea?

Thanks a lot,

Samuele

eysteinn · June 11, 2012, 07:13

Quote:

Originally Posted by samiam1000

Dear All,

when I try to run the pimpleDyMFoam I get this error:

Code:

lab@lab-laptop:~/Documenti/cases_OF/OF_case20_mesh_generation/0Deg$ pimpleDyMFoam 
/*---------------------------------------------------------------------------*\
| =========                 |                                                 |
| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
|  \\    /   O peration     | Version:  2.1.0                                 |
|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
|    \\/     M anipulation  |                                                 |
\*---------------------------------------------------------------------------*/
Build  : 2.1.0-0bc225064152
Exec   : pimpleDyMFoam
Date   : Jun 11 2012
Time   : 11:49:48
Host   : "lab-laptop"
PID    : 4105
Case   : /home/lab/Documenti/cases_OF/OF_case20_mesh_generation/0Deg
nProcs : 1
sigFpe : Enabling floating point exception trapping (FOAM_SIGFPE).
fileModificationChecking : Monitoring run-time modified files using timeStampMaster
allowSystemOperations : Disallowing user-supplied system call operations

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time

Create mesh for time = 0

Selecting dynamicFvMesh dynamicMotionSolverFvMesh
Selecting motion solver: displacementSBRStress
Selecting motion diffusion: exponential
Selecting motion diffusion: inverseFaceDistance
Reading field p

Reading field U



--> FOAM FATAL IO ERROR: 
"ill defined primitiveEntry starting at keyword 'boundaryField' on line 23 and ending at line 83"

file: /home/lab/Documenti/cases_OF/OF_case20_mesh_generation/0Deg/0/U at line 83.

    From function primitiveEntry::readEntry(const dictionary&, Istream&)
    in file lnInclude/IOerror.C at line 132.

FOAM exiting

lab@lab-laptop:~/Documenti/cases_OF/OF_case20_mesh_generation/0Deg$

The error is in the U file. Here it is:

Code:

/*--------------------------------*- C++ -*----------------------------------*\
| =========                 |                                                 |
| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
|  \\    /   O peration     | Version:  2.1.0                                 |
|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
|    \\/     M anipulation  |                                                 |
\*---------------------------------------------------------------------------*/
FoamFile
{
    version     2.0;
    format      ascii;
    class       volVectorField;
    location    "0";
    object      U;
}
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //

dimensions      [0 1 -1 0 0 0 0];

internalField   uniform (0 0 0);

boundaryField
{
    wall-volume_internal
    {
        type            fixedValue;i
    value        uniform (0 0 0);
    }
    symmetry_1-volume_external
    {
        type            symmetryPlane;
    }
    symmetry_1-volume_internal
    {
        type            symmetryPlane;
    }
    symmetry_2-volume_external
    {
        type            symmetryPlane;
    }
    symmetry_2-volume_internal
    {
        type            symmetryPlane;
    }
    wall_ext
    {
        type            fixedValue;
    value        uniform (0 0 0);
    }
    honeycomb
    {
        type            fixedValue;
    value        uniform (-1 0 0);
    }
    intake
    {
        type            zeroGradient;
    }
    bottom
    {
        type            fixedValue;
    value        uniform (0 0 0);
    }
    up
    {
        type            fixedValue;
    value        uniform (0 0 0);
    }
    wall_up_int
    {
        type            fixedValue;
    value        uniform (0 0 0);
    }
    door
    {
        type            fixedValue;
    value        uniform (0 0 0);
    }
}


// ************************************************************************* //

Any idea?

Thanks a lot,

Samuele

Hi Samuele.

Have you tried removing the trailing i in line 26?

/Eysteinn

samiam1000 · June 11, 2012, 07:21

Ooooops,

sorry!

Thanks a lot! That's ok, now!

Sam

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Basic usage of pimpleDyMFoam	jferrari	OpenFOAM Pre-Processing	7	August 5, 2013 19:48
Help on segmentation fault with pimpleDyMFoam	ebah6	OpenFOAM Running, Solving & CFD	2	July 5, 2013 08:27
Relative flux in pimpleDyMFoam	Igor_2011	OpenFOAM	0	July 20, 2011 18:50
Running PimpleDyMFoam in parallel	paul b	OpenFOAM Running, Solving & CFD	8	April 20, 2011 06:21
pimpleDyMFoam stability problems	cnsidero	OpenFOAM Running, Solving & CFD	3	January 29, 2011 13:36

June 11, 2012, 07:21		#3
samiam1000 Senior Member Samuele Z Join Date: Oct 2009 Location: Mozzate - Co - Italy Posts: 520 Rep Power: 19	Ooooops, sorry! Thanks a lot! That's ok, now! Sam