|
[Sponsors] |
Static Pressure suddenly Become Unsteady rhoSimpleFOAM Simulation |
![]() |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
![]() |
![]() |
#1 |
Senior Member
Sakun
Join Date: Nov 2019
Location: United Kingdom
Posts: 107
Rep Power: 6 ![]() |
Hi,
I am trying to replicate isentropic mach number graph as shown in the attached picture(research paper link is attached) and i am using rhoSimpleFOAM to validate this case since paper has validated using RANS. Basically velocity is developed using total and static pressure difference in INLET (115775) and OUTLET (97251) respectively and i am running the simulation using ESI version of openfoam v2122. Problem occurs when the developed flow is about exit the OUTLET, such as pressure become unsteady and continuity error increased but simulation doesn’t diverge. Research paper link : https://drive.google.com/file/d/1two...ew?usp=sharing Pictures of the openFOAM case file : https://drive.google.com/file/d/1IWJ...usp=share_link I can share the case file upon on request and would like to post openFOAM files as well. Can someone help me to overcome this issue, i have been stuck on this case for 7 months now ![]() Highly appreciate your time, please help me. |
|
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
What are the best settings for a channel flow simulation? | Ashkan Kashani | CFX | 3 | October 13, 2022 21:36 |
Issues on the simulation of high-speed compressible flow within turbomachinery | dowlee | OpenFOAM Running, Solving & CFD | 11 | August 6, 2021 06:40 |
viscosity udf don't use correct temperature and strain rate | rezvani | Fluent UDF and Scheme Programming | 8 | May 27, 2021 05:40 |
Data Center Simulation with abnormal static pressure in hot aisles | fanaticreader95 | FLUENT | 2 | December 7, 2019 13:40 |
Hydrostatic pressure in 2-phase flow modeling (long) | DS & HB | Main CFD Forum | 0 | January 8, 2000 15:00 |