OpenFOAM Running, Solving & CFD

Rating Thread / Thread Starter	Last Post	Replies	Views
Error andesameer	July 28, 2009 03:54 by andesameer	0	1,188
localBlended braennstroem	July 28, 2009 03:50 by braennstroem	0	1,298
New AMG Solvers in OF141dev SVN philippose	July 27, 2009 15:52 by johndeas	8	4,556
Inviscid Supersonic Flow Simulation Alan	July 27, 2009 04:36 by Alan	2	2,423
Temperaturedependent flux boundary condition hjasak	July 27, 2009 04:32 by prabhu	6	2,605
trying floatTransfer=1 bastil	July 27, 2009 04:31 by bastil	7	2,111
Problems with Unsteady simulations using LRR Model in transientSimpleFoam barath.ezhilan	July 25, 2009 14:58 by barath.ezhilan	1	1,760
LRR turbulence model gianlu	July 25, 2009 12:27 by barath.ezhilan	1	1,890
Create internal faces after createPatch linnemann	July 24, 2009 05:00 by linnemann	3	2,102
Heat transfer in liquid water suggestions for chioce of solver ( 1 2) hkb	July 23, 2009 09:16 by gschaider	25	6,759
initial velocity field with a pressure difference sven82	July 23, 2009 06:05 by kjetil	2	1,492
couplingFactor in LRR turbulence model natrask	July 22, 2009 17:55 by natrask	0	1,438
timeVaryingUniformTotalPressure boundary condition nishant_hull	July 22, 2009 12:56 by nishant_hull	1	1,536
zeroGradient pressure and moving mesh kassiotis	July 22, 2009 10:28 by kassiotis	0	1,783
Time Steps gets smaller and smaller titio	July 22, 2009 09:19 by s.sivakumar	1	1,906
snappyMesh Motor Bike case for simpleFoam solver s.sivakumar	July 22, 2009 09:00 by s.sivakumar	0	1,673
Forces in axisymmetric cases linnemann	July 22, 2009 02:42 by linnemann	1	1,269
simulate flat air passage ways Fonss	July 22, 2009 00:54 by Fonss	2	1,372
rhoSimpleform error andesameer	July 22, 2009 00:28 by andesameer	0	1,135
Restart of case crashes feijooos	July 21, 2009 12:04 by feijooos	0	1,336
Laminar field as initial state for turbulent two phase pipe flow kjetil	July 21, 2009 10:15 by kjetil	3	2,866
Problem in simulation titio	July 21, 2009 08:28 by titio	0	1,470
What's the remedy for that!!! keishawillstone	July 21, 2009 06:53 by keishawillstone	2	1,266
Injector configuration issues coastal593	July 21, 2009 06:28 by huoyinghw	14	2,664
MultiphaseInterFoam virginie_e	July 21, 2009 04:37 by AlGates	1	2,066
dieselFoam: Volume fraction limitation? Rachel	July 21, 2009 03:09 by alberto	3	2,280
Combining BCs: wall - outlet. Boundary layer disappears MartinaF	July 20, 2009 19:14 by MartinaF	1	2,469
Problem setting with chtmultiregionFoam Antonin	July 20, 2009 07:52 by henrik	3	2,305
dieselFoam- Density and mass flow rate Rachel	July 20, 2009 07:36 by Rachel	1	2,190
case in 1.5 can not run in 1.5-dev? waynezw0618	July 20, 2009 06:57 by henrik	1	1,155
What is neg(s)? sandy	July 20, 2009 03:43 by henrik	1	2,615
Doubt in term representation in the fvSchemes dictionary titio	July 17, 2009 14:21 by titio	0	1,535
Waves in simple channel taranov	July 17, 2009 07:59 by taranov	0	1,864
VOF method +surface tension yapalparvi	July 17, 2009 04:56 by jploz	5	3,005
Howto mass source in interFoam caw	July 16, 2009 07:59 by isabel	6	5,207
dieselFoam: how to implement thermo for liquid/gas continuous phase natrask	July 16, 2009 06:37 by Rachel	1	1,728
channelOodles postChannel jeffkenning	July 16, 2009 06:19 by zebu83	1	2,094
twoPhaseProperties feijooos	July 16, 2009 05:21 by isabel	1	1,559
twoPhaseEulerFoam solver amscosta	July 15, 2009 18:38 by silva	2	1,557
dnsFoam cfdmarkus	July 15, 2009 07:26 by cfdmarkus	0	1,622

Read this first: How to ask a question on the forums

Page 427 of 489

427

	New posts		Hot thread with new posts
	No new posts		Hot thread with no new posts
	Thread is closed

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

All times are GMT -4. The time now is 21:15.