OpenFOAM Running, Solving & CFD

Rating Thread / Thread Starter	Last Post	Replies	Views
Error andesameer	July 28, 2009 03:54 by andesameer	0	1,180
localBlended braennstroem	July 28, 2009 03:50 by braennstroem	0	1,262
New AMG Solvers in OF141dev SVN philippose	July 27, 2009 15:52 by johndeas	8	4,543
Inviscid Supersonic Flow Simulation Alan	July 27, 2009 04:36 by Alan	2	2,382
Temperaturedependent flux boundary condition hjasak	July 27, 2009 04:32 by prabhu	6	2,595
trying floatTransfer=1 bastil	July 27, 2009 04:31 by bastil	7	2,078
Problems with Unsteady simulations using LRR Model in transientSimpleFoam barath.ezhilan	July 25, 2009 14:58 by barath.ezhilan	1	1,746
LRR turbulence model gianlu	July 25, 2009 12:27 by barath.ezhilan	1	1,867
Create internal faces after createPatch linnemann	July 24, 2009 05:00 by linnemann	3	2,073
Heat transfer in liquid water suggestions for chioce of solver ( 1 2) hkb	July 23, 2009 09:16 by gschaider	25	6,662
initial velocity field with a pressure difference sven82	July 23, 2009 06:05 by kjetil	2	1,453
couplingFactor in LRR turbulence model natrask	July 22, 2009 17:55 by natrask	0	1,430
timeVaryingUniformTotalPressure boundary condition nishant_hull	July 22, 2009 12:56 by nishant_hull	1	1,525
zeroGradient pressure and moving mesh kassiotis	July 22, 2009 10:28 by kassiotis	0	1,759
Time Steps gets smaller and smaller titio	July 22, 2009 09:19 by s.sivakumar	1	1,894
snappyMesh Motor Bike case for simpleFoam solver s.sivakumar	July 22, 2009 09:00 by s.sivakumar	0	1,665
Forces in axisymmetric cases linnemann	July 22, 2009 02:42 by linnemann	1	1,254
simulate flat air passage ways Fonss	July 22, 2009 00:54 by Fonss	2	1,365
rhoSimpleform error andesameer	July 22, 2009 00:28 by andesameer	0	1,126
Restart of case crashes feijooos	July 21, 2009 12:04 by feijooos	0	1,326
Laminar field as initial state for turbulent two phase pipe flow kjetil	July 21, 2009 10:15 by kjetil	3	2,836
Problem in simulation titio	July 21, 2009 08:28 by titio	0	1,458
What's the remedy for that!!! keishawillstone	July 21, 2009 06:53 by keishawillstone	2	1,253
Injector configuration issues coastal593	July 21, 2009 06:28 by huoyinghw	14	2,646
MultiphaseInterFoam virginie_e	July 21, 2009 04:37 by AlGates	1	2,053
dieselFoam: Volume fraction limitation? Rachel	July 21, 2009 03:09 by alberto	3	2,270
Combining BCs: wall - outlet. Boundary layer disappears MartinaF	July 20, 2009 19:14 by MartinaF	1	2,458
Problem setting with chtmultiregionFoam Antonin	July 20, 2009 07:52 by henrik	3	2,293
dieselFoam- Density and mass flow rate Rachel	July 20, 2009 07:36 by Rachel	1	2,176
case in 1.5 can not run in 1.5-dev? waynezw0618	July 20, 2009 06:57 by henrik	1	1,142
What is neg(s)? sandy	July 20, 2009 03:43 by henrik	1	2,540
Doubt in term representation in the fvSchemes dictionary titio	July 17, 2009 14:21 by titio	0	1,508
Waves in simple channel taranov	July 17, 2009 07:59 by taranov	0	1,829
VOF method +surface tension yapalparvi	July 17, 2009 04:56 by jploz	5	2,981
Howto mass source in interFoam caw	July 16, 2009 07:59 by isabel	6	5,156
dieselFoam: how to implement thermo for liquid/gas continuous phase natrask	July 16, 2009 06:37 by Rachel	1	1,722
channelOodles postChannel jeffkenning	July 16, 2009 06:19 by zebu83	1	2,074
twoPhaseProperties feijooos	July 16, 2009 05:21 by isabel	1	1,552
twoPhaseEulerFoam solver amscosta	July 15, 2009 18:38 by silva	2	1,548
dnsFoam cfdmarkus	July 15, 2009 07:26 by cfdmarkus	0	1,611

Read this first: How to ask a question on the forums

Page 426 of 488

426

	New posts		Hot thread with new posts
	No new posts		Hot thread with no new posts
	Thread is closed

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

All times are GMT -4. The time now is 04:44.