OpenFOAM Running, Solving & CFD

Rating Thread / Thread Starter	Last Post	Replies	Views
Gas leaking along walls and boundary layers? kjetil	November 12, 2009 19:15 by kjetil	0	1,335
$FOAM_RUN >> FoamX& mgolbs	November 12, 2009 11:20 by ngj	3	1,792
OpenFOAM - 2nd order of discretization? makaveli_lcf	November 12, 2009 08:15 by makaveli_lcf	0	3,652
Error: icoLagrangianFoam flying	November 11, 2009 13:26 by flying	16	2,480
Swirl und tumble number sven82	November 11, 2009 12:30 by sven82	0	4,093
P1 radiation model and 2D calculation autumn1012	November 11, 2009 03:52 by autumn1012	6	4,985
Specifying phase on both sides of a Boundary Condition? rassilon	November 11, 2009 01:41 by rassilon	3	1,568
Run in parallel: bug or what? novyno	November 10, 2009 11:34 by novyno	0	1,713
Turbulence Model phi vs phi_ doug	November 10, 2009 05:33 by isabel	4	2,668
RhoExplicitPorousSimpleFoam r2d2	November 10, 2009 03:28 by olesen	7	2,496
Simple 2D airfoil Boudary Conditions doug	November 9, 2009 11:32 by milleniumrider	3	1,655
salome, openfoam and moving mesh prhlava	November 9, 2009 09:59 by prhlava	8	8,168
timeActivatedExplicitSource klilla	November 9, 2009 08:14 by klilla	2	1,633
conditions for unsteady problems dvdromnu	November 9, 2009 03:15 by dmoroian	5	3,269
motion of bodies & GGI alexm	November 8, 2009 23:01 by alexm	0	1,700
Moving from simpleFoam to interFoam with alpha = 0 kjetil	November 8, 2009 21:04 by chiven	1	2,622
CFL number limit for InterFoam kumar	November 8, 2009 10:33 by kumar	0	2,194
pimpleDyMFoam Stefan Arsovski	November 8, 2009 10:04 by navier-stokes	4	5,373
OpenFOAM dictionary bastil	November 8, 2009 05:46 by jploz	1	1,769
How to get the pressure gradient value for a probe cell hjasak	November 5, 2009 23:27 by sven	1	1,319
Force reporting whilst running in parallel madad2005	November 5, 2009 04:30 by madad2005	0	1,032
Heat Transfer iamnafets	November 2, 2009 17:13 by iamnafets	0	1,462
swirling flow in simpleFoam compared with FLUENT belinda	November 2, 2009 04:57 by belinda	0	2,076
wind turbine simulation mahaputra	October 30, 2009 19:40 by ddigrask	1	2,212
OPTERON SHANGHAI / ESTAMBUL versus INTEL NEHALEM pbohorquez	October 30, 2009 16:42 by pbohorquez	3	2,920
RhoSimpleFoam problem with patch nishant_hull	October 30, 2009 13:51 by smart	15	3,521
Using pressureTransmissive BC in reactingFoam dohnie	October 30, 2009 06:58 by dohnie	4	2,464
Comparing values of two different fields sambatra	October 30, 2009 05:13 by sambatra	0	1,317
Hypersonic with OpenFOAM achilleslaststand	October 29, 2009 11:02 by florian_krause	1	6,199
Porous Zone: pressure artefacts evrikon	October 28, 2009 12:12 by evrikon	3	2,269
Common solver for subsonic/supersonic flows? ezsoal	October 28, 2009 06:10 by ezsoal	0	1,215
Liquid Metals and Heat Transfer juanltm	October 28, 2009 06:00 by PetSul	7	3,769
How to determine the direction of cell face vectors on processor patches sebastian_vogl	October 27, 2009 09:47 by sebastian_vogl	0	2,373
Adaptive Mesh Refinement and Cyclic Boundary Conditions adona058	October 23, 2009 10:17 by DanL	6	5,372
Wall functions and turbulence models implementations jposunz	October 23, 2009 05:02 by david	2	2,643
What solver to use for sink/source flow tekky	October 22, 2009 18:41 by tekky	0	1,255
rUA inside/outside PISO loop johndeas	October 22, 2009 08:13 by fs82	5	2,380
Error calculating thermodynamic properties in reactingFoam mighelone	October 21, 2009 17:47 by mighelone	5	2,825
Compressible Turbulence Model Implementations shaun	October 21, 2009 12:55 by natrask	4	1,761
How to calculate liquid volume as the interface moves for interFoam Solver ( 1 2) asaha	October 21, 2009 05:34 by chiven	25	5,553

Read this first: How to ask a question on the forums

Page 422 of 489

422

	New posts		Hot thread with new posts
	No new posts		Hot thread with no new posts
	Thread is closed

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

All times are GMT -4. The time now is 00:22.