OpenFOAM Running, Solving & CFD

Rating Thread / Thread Starter	Last Post	Replies	Views
interFoam in 1.6.x, solver's slightly changed from 1.5; is p = pd? kjetil	December 15, 2009 18:41 by Ohbuchi	1	1,517
Compared MRFSimpleFoam and Fluent in a centrifugal pump! renyun0511	December 12, 2009 21:58 by renyun0511	2	2,192
Is that a checker-boarding pattern? How to avoid it? rcastilla	December 11, 2009 11:50 by rcastilla	2	1,914
calculating parallel on two machines -t!m-	December 11, 2009 09:09 by -t!m-	2	1,300
Field averaging in a certain time interval misakagan	December 11, 2009 05:39 by misakagan	1	2,337
QUICK Scheme mmahdinia	December 9, 2009 16:30 by mmahdinia	3	2,840
Strange behaviour on outlet boundary using LES segersson	December 9, 2009 03:57 by segersson	0	1,743
Solver for a turbulent flow in a tube sErik	December 8, 2009 10:33 by sErik	1	2,045
Problem on multiple processors..works fine on single processor! skabilan	December 5, 2009 12:19 by skabilan	2	1,728
fixedGradient boundary condition skabilan	December 3, 2009 13:55 by skabilan	2	1,618
Poiseuille flow in dsmcFoam alberto	December 3, 2009 02:03 by alberto	0	2,108
residuals error by MRFSimpleFOAM renyun0511	December 2, 2009 21:55 by renyun0511	0	1,149
Foam error griztown	December 2, 2009 17:53 by griztown	1	1,440
Keeping p constant Pooven	November 30, 2009 07:33 by Pooven	0	1,730
Fluid in a channel Gearb0x	November 28, 2009 14:10 by jnally	1	1,202
snappyhexmesh inlet divergence olhe0002	November 27, 2009 12:39 by braennstroem	1	1,427
OF suitable for dynamic building simulation? pizzaice	November 27, 2009 08:02 by pizzaice	0	1,647
Problems with Turbulence Modeling ezsoal	November 26, 2009 15:12 by ezsoal	4	4,185
Error in the enthalpy equation danilo	November 26, 2009 07:42 by Sim	7	2,232
initial conditions openfoam_user	November 26, 2009 02:25 by olesen	1	1,898
convergence problems using simpleFoam sebbi	November 25, 2009 15:27 by sebbi	3	3,094
Calculation of heat transfer coefficients uli_u	November 25, 2009 10:41 by eelcovv	16	21,477
Major differences between Comsol and OpenFOAM, steady state diffuser singlephase flow kjetil	November 24, 2009 19:44 by kjetil	0	2,562
pisoFoam Error sErik	November 24, 2009 03:33 by sErik	5	1,940
log wind profil openfoam_user	November 23, 2009 09:06 by openfoam_user	0	1,197
Difference between p in OF-1.6.x and pd in OF-1.5 kumar	November 23, 2009 03:45 by linnemann	3	1,523
Multiphase solvers Theory titio	November 20, 2009 17:23 by feijooos	1	1,765
shockTube simulation different solvers feijooos	November 20, 2009 17:20 by feijooos	8	2,517
Solver selection? titio	November 20, 2009 13:38 by titio	0	1,173
doubt in representation the transpose of the velocity gradient titio	November 19, 2009 14:11 by titio	0	2,625
InterDymfoam validation lostin4ever	November 19, 2009 14:06 by lostin4ever	0	1,319
SimpleFoam unable to reach steady state francois	November 19, 2009 13:33 by novyno	8	3,553
Problem in defining and using the deformation rate tensor titio	November 19, 2009 12:50 by titio	0	1,559
Useless patch beto	November 19, 2009 07:38 by maddalena	3	1,340
MRFSimpleFOAM goes divergenced! renyun0511	November 19, 2009 02:11 by renyun0511	0	3,030
No outflow - Error sErik	November 18, 2009 11:10 by sErik	1	2,079
Linearized NS euqations: how to solve them?(problem with Matrix operations..) matteoL	November 18, 2009 06:58 by matteoL	0	2,916
PISO Details Dr B.M. Smith (Smith)	November 17, 2009 11:31 by haghajani	17	5,782
InterTrackFoam in OF1.6? M_Harrer	November 17, 2009 09:43 by M_Harrer	2	1,387
Herschel-Bulkley problem Mulder	November 17, 2009 08:40 by Mulder	0	1,676

Read this first: How to ask a question on the forums

Page 415 of 483

415

	New posts		Hot thread with new posts
	No new posts		Hot thread with no new posts
	Thread is closed

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

All times are GMT -4. The time now is 13:10.