OpenFOAM Running, Solving & CFD

Rating Thread / Thread Starter	Last Post	Replies	Views
twoPhaseEulerFoam execution error Trewhela	March 11, 2015 09:40 by Trewhela	0	1,272
How can I put the heat flux into a solver? wtjhaha	March 11, 2015 03:50 by agustinvo	1	922
Compression Corner ( Hypersonic Flow ) Redoctober	March 10, 2015 16:59 by Redoctober	0	1,046
U velocity anomaly rietis	March 10, 2015 14:04 by rietis	17	1,361
twoLiquidMixingFoam - continuity equation jenssnej	March 10, 2015 13:30 by alexeym	9	2,134
Patch-averaging in OpenFOAM d.lagattolla	March 10, 2015 08:42 by d.lagattolla	0	986
the issue for TKE at wall wes1204	March 10, 2015 08:30 by wes1204	0	901
how to add new motion function in supercomputer chun	March 10, 2015 06:40 by chun	0	833
force coefficient's amplitude Konstantine	March 10, 2015 06:00 by Konstantine	4	1,219
EEqn.h BuoyantSimpleFoam normy	March 10, 2015 05:43 by normy	0	1,041
wrongOrientedFaces during the simulation phoenix_23	March 10, 2015 05:34 by phoenix_23	0	1,285
rhoCentralFoam:: pressure driven flow , pressure shoot at inlet axyz0390	March 9, 2015 23:52 by axyz0390	0	996
anyone used setFields for igniting a flame (reactingFoam) ? Dan1788	March 9, 2015 12:57 by Dan1788	3	1,430
elasticSolidFoam - crash with non-orthogonal correction mabinty	March 9, 2015 09:47 by mabinty	0	836
Running OpenFOAM on Google Mashine Michail	March 9, 2015 09:18 by Michail	0	1,228
Problem with dynamic mesh and mesh decomposition Zyryx	March 9, 2015 06:08 by Zyryx	0	1,013
Solver Suggestions: Incompressible, high pressure, 3 phases, steady state Sam_CFD	March 9, 2015 05:40 by Sam_CFD	11	1,261
pressure sensor on a floating body ashkan	March 9, 2015 04:14 by ashkan	2	1,449
Calculating center of mass kristaps	March 8, 2015 04:59 by 13msmemusman	2	3,756
Wingmotion Tutorial - Changing parameters? melkor	March 7, 2015 22:27 by hongfu2233	1	985
Unrealistic supersonic pockets at pressure inlet c0sk	March 7, 2015 16:52 by c0sk	0	903
problem with chtMultiRegion v.2.1 Schmetterling	March 7, 2015 15:07 by Schmetterling	4	1,447
Adding porous zones in icoFoam solver josephn	March 7, 2015 00:28 by josephn	4	3,393
Slip BC works but fixedValue for U crashes. Potential solutions? be_inspired	March 6, 2015 19:25 by be_inspired	0	974
right solver for externalWallHeatFluxTemperature ruedavallejo	March 6, 2015 11:12 by laurentD	2	1,890
komegaSST underprecitcting lift/cl klausb	March 6, 2015 10:06 by klausb	0	1,067
steady state lagrangian solver kalyan	March 6, 2015 05:26 by kalyan	0	1,673
Error due to Unstructured Mesh with custom solver fredo490	March 6, 2015 02:46 by sharonyue	2	2,802
nonNewtonianIcoFoam equation Svensen	March 6, 2015 02:03 by Svensen	3	1,624
Wrong fluctuation of pressure in transient simulation caitao	March 5, 2015 21:33 by caitao	2	1,938
problems with interDyMFoam alexm	March 5, 2015 15:09 by Mahyar Javidi	4	2,607
potentialFoam/cylinder tutorial problems Nkl	March 5, 2015 10:17 by Nkl	2	1,565
interFoam, setting velocity in fluid1 to zero Martin_K_lalelu	March 5, 2015 05:17 by ThomasV	1	1,305
Solving Flow past Square Cylinder sam.ho	March 5, 2015 04:15 by RodriguezFatz	19	1,881
Hi All ARUN K RAJ	March 5, 2015 01:09 by ARUN K RAJ	0	839
Units in potentialFoam xiaofishnus	March 4, 2015 22:07 by xiaofishnus	0	1,178
Face define with 3 points, hex. rietis	March 4, 2015 07:42 by rietis	1	1,310
Simplefoam, steady or unsteady hawkeye321	March 4, 2015 06:22 by Naresh yathuru	12	6,932
motionu albinjohny	March 4, 2015 04:13 by albinjohny	0	1,368
Validation plunging airfoil - Forces are wrong!!! wiedangel	March 3, 2015 12:34 by pruthvi1991	3	1,384

Read this first: How to ask a question on the forums

Page 287 of 486

287

	New posts		Hot thread with new posts
	No new posts		Hot thread with no new posts
	Thread is closed

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

All times are GMT -4. The time now is 18:25.