|
[Sponsors] |
December 1, 2010, 04:01 |
|
#2 |
Senior Member
Stefan Herbert
Join Date: Dec 2009
Location: Darmstadt, Germany
Posts: 129
Rep Power: 18 |
Short answer: No way.
If you define a patch to be cyclic, you have to apply cyclic-BCs for every field, too. But if only your U is cyclic, you might be able to use directMapped-BC for this field instead. There are already lots of threads about the usage of this BC. Regards, Stefan |
|
Tags |
cyclic boundaries |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[Commercial meshers] Using starToFoam | clo | OpenFOAM Meshing & Mesh Conversion | 33 | September 26, 2012 05:04 |
[Other] StarToFoam error | Kart | OpenFOAM Meshing & Mesh Conversion | 1 | February 4, 2010 05:38 |
CheckMeshbs errors | ivanyao | OpenFOAM Running, Solving & CFD | 2 | March 11, 2009 03:34 |
[Gmsh] Import gmsh msh to Foam | adorean | OpenFOAM Meshing & Mesh Conversion | 24 | April 27, 2005 09:19 |
Multicomponent fluid | Andrea | CFX | 2 | October 11, 2004 06:12 |