 |
 |
 |
|
|
|
[Sponsors] | ||||
SpalartAllmarasDDES - Visualization of LES/RANS region |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
March 30, 2010, 10:54
|
SpalartAllmarasDDES - Visualization of LES/RANS region
|
#1 |
|
New Member
Join Date: Jan 2010
Posts: 12
Rep Power: 16  |
Hi all,
I'd like to generate an output to visualize the RANS and the LES region for DDES. My approach was to create an additional field containing the result of the fd function in spalartAllmarasDDES.C, which delimits the two regions, and to write it to a file. Now, after some fruitless hacking attempts, it seems that I'm not enough a skilled programmer, so it would be great if anyone could give me a hint how to access the fd function and to create an output from it. Thanks, Luise |
|
|
|
|
|
| Tags |
| fd(), region, spallartallmarasddes |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [snappyHexMesh] Multi region meshing & recovering the original patch names | fluidpath | OpenFOAM Meshing & Mesh Conversion | 4 | May 19, 2013 20:13 |
| [Commercial meshers] Using starToFoam | clo | OpenFOAM Meshing & Mesh Conversion | 33 | September 26, 2012 05:04 |
| [Other] StarToFoam error | Kart | OpenFOAM Meshing & Mesh Conversion | 1 | February 4, 2010 05:38 |
| [Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues | michele | OpenFOAM Meshing & Mesh Conversion | 2 | July 15, 2005 05:15 |
| [Gmsh] Import gmsh msh to Foam | adorean | OpenFOAM Meshing & Mesh Conversion | 24 | April 27, 2005 09:19 |
Linear Mode
