solidParticleFoam particle positions

caw · October 6, 2009, 03:36

Dear Foamers,

i am running into trouble when using solidParticleFoam
(http://openfoam-extend.svn.sourcefor...ParticleFoam.C)

I have a pure hex 2d mesh (1 cell thickness) and position a particle in the mesh (i tripple checked that the position IS in the mesh). When running solidParticleFoam (with zero gravity) i encounter warnings like:

--> FOAM Warning :
From function Foam::cellPointWeight::findTriangle(const polyMesh&, const vector&, const label)
in file interpolation/interpolation/interpolationCellPoint/cellPointWeight/cellPointWeight.C at line 291
Triangle search failed; using closest triangle to point
cell face: 598

Sometimes those warnings vanish after some time and tracking works fine. But when i change the initial particle position only by 1mm then those warnings are shown indefinitly and no tracking occurs.

Any ideas?

Every kind oh help is highly appreciated.

Thanks
Christian

caw · October 6, 2009, 04:50

Issue seems to be solved.

i used OF 1.5.x at first.

After checking the solver with 1.6.x it seems to work fine

October 6, 2009, 03:36	solidParticleFoam particle positions	#1
caw Member Christian Winkler Join Date: Mar 2009 Location: Mannheim, Germany Posts: 63 Rep Power: 17	Dear Foamers, i am running into trouble when using solidParticleFoam (http://openfoam-extend.svn.sourcefor...ParticleFoam.C) I have a pure hex 2d mesh (1 cell thickness) and position a particle in the mesh (i tripple checked that the position IS in the mesh). When running solidParticleFoam (with zero gravity) i encounter warnings like: --> FOAM Warning : From function Foam::cellPointWeight::findTriangle(const polyMesh&, const vector&, const label) in file interpolation/interpolation/interpolationCellPoint/cellPointWeight/cellPointWeight.C at line 291 Triangle search failed; using closest triangle to point cell face: 598 Sometimes those warnings vanish after some time and tracking works fine. But when i change the initial particle position only by 1mm then those warnings are shown indefinitly and no tracking occurs. Any ideas? Every kind oh help is highly appreciated. Thanks Christian

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Velocity of Fluid @ different positions of Particle in DPM using UDF	pmghadge	FLUENT	1	June 16, 2009 20:11
DPM UDF particle position using the macro P_POS(p)[i]	dm2747	FLUENT	0	April 17, 2009 02:29
Number of particle positions in Lagrangian model	KK	CFX	4	February 16, 2008 05:56
the separated particle temperature in cyclone	mkuswadi	FLUENT	0	December 17, 2003 09:25
Particle Trajectory calculation when particle hit	yueroo	FLUENT	2	February 28, 2001 05:26

October 6, 2009, 04:50		#2
caw Member Christian Winkler Join Date: Mar 2009 Location: Mannheim, Germany Posts: 63 Rep Power: 17	Issue seems to be solved. i used OF 1.5.x at first. After checking the solver with 1.6.x it seems to work fine