k Omega SST SAS for OpenFOAM 1.5???

barath.ezhilan · July 25, 2009, 15:06

Hi All,

I am currently simulating strong swirling flow in a conical diffuser.

I have tried out the k-Omega SST filter model proposed by Nilsson and it works!!
I tried with the RSMThe time step error blows up in the RSM model

Now I would like to use the k Omega SST-SAS technique as proposed by Menter!

The model for OpenFoam 1.4 version is given here
http://openfoamwiki.net/index.php/Turbulence_Modeling

however, I am using OpenFOAM version 1.5

Is the k-Omega SST-SAS turbulence model available for OpenFOAM 1.5??

ngj · July 25, 2009, 16:13

Hi Barath

Without knowing the full extend of the problems, I believe you should be able to download the files and compare them with those for kOmegaSST currently available under 1.5.x.
As the basis probably is the same, you should be able to identify the differences and make your own implementation of the kOmegaSST-SAS.
When it is done and tested, I will encourage you to share the implementation via the wiki.

Have a nice weekend,

Niels

barath.ezhilan · July 25, 2009, 20:38

Hi Niels,

Thanks for your reply.. I will do it soon and share it with you guyz!!

L.J.Jiang · June 2, 2010, 08:41

Dear Barath

How about your SAS experience?
Could you share some results or tutorials with us?
Thanks in advance!

LJ

July 25, 2009, 15:06	k Omega SST SAS for OpenFOAM 1.5???	#1
barath.ezhilan New Member Barath Ezhilan Join Date: Jun 2009 Posts: 20 Rep Power: 17	Hi All, I am currently simulating strong swirling flow in a conical diffuser. I have tried out the k-Omega SST filter model proposed by Nilsson and it works!! I tried with the RSMThe time step error blows up in the RSM model Now I would like to use the k Omega SST-SAS technique as proposed by Menter! The model for OpenFoam 1.4 version is given here http://openfoamwiki.net/index.php/Turbulence_Modeling however, I am using OpenFOAM version 1.5 Is the k-Omega SST-SAS turbulence model available for OpenFOAM 1.5??

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Implementation details of SST k-omega model	Niels	Main CFD Forum	3	July 3, 2008 18:45
CFX4.3 -build analysis form	Chie Min	CFX	5	July 13, 2001 00:19

July 25, 2009, 16:13		#2
ngj Senior Member Niels Gjoel Jacobsen Join Date: Mar 2009 Location: Copenhagen, Denmark Posts: 1,903 Rep Power: 37	Hi Barath Without knowing the full extend of the problems, I believe you should be able to download the files and compare them with those for kOmegaSST currently available under 1.5.x. As the basis probably is the same, you should be able to identify the differences and make your own implementation of the kOmegaSST-SAS. When it is done and tested, I will encourage you to share the implementation via the wiki. Have a nice weekend, Niels

July 25, 2009, 20:38		#3
barath.ezhilan New Member Barath Ezhilan Join Date: Jun 2009 Posts: 20 Rep Power: 17	Hi Niels, Thanks for your reply.. I will do it soon and share it with you guyz!!

June 2, 2010, 08:41		#4
L.J.Jiang New Member Jiang Lijun Join Date: Mar 2009 Posts: 14 Rep Power: 17	Dear Barath How about your SAS experience? Could you share some results or tutorials with us? Thanks in advance! LJ