a question of turbulent mixing layer

JJY · April 2, 2009, 10:21

Hi
I am new to OpenFoam and i want to calculate turbulent mixing layer.
The free-stream Mach number M=0.2;
Re=50;
temperature T=273.15K;
pressure p=100000pa;
equal and opposite free-stream speed U;

I don't know to use which solver?
How to simulate it?

Thank you
Best regards
Jianying

wizard1301 · April 3, 2009, 04:59

You could use rhoTurbFoam or coodles the first for RANS, the second for LES modelling. These are compressible solvers, probably you can use incompressible solvers if your Mach number is low.
Bye
Antonio

JJY · April 3, 2009, 11:08

Hi Antonio
Thank you for your answer.
How do I set initial velocity and other conditions?
Are they like conditions of channelOodles?
Thank you
Jianying

wizard1301 · April 3, 2009, 12:14

Hi Jianying

You should start with one of the tutorial that you can find in the user/run/tutorial folder. Try with the coodles tutorial (it's a simple step with imposed inlet velocity) and try to change boundary condition; then try to change geometry, modifying the blockMeshDict in the costant directory of the tutorial/coodles dir and running the blockMesh utility.

In the userguide you can find a step by step guide to do something similar for the cavity tutorial.

Antonio

JJY · April 3, 2009, 12:25

Hi Antonio
Thank you for your answer.
I will try it .
Jianying

April 2, 2009, 10:21	a question of turbulent mixing layer	#1
JJY New Member Jianying Jiao Join Date: Mar 2009 Posts: 3 Rep Power: 17	Hi I am new to OpenFoam and i want to calculate turbulent mixing layer. The free-stream Mach number M=0.2; Re=50; temperature T=273.15K; pressure p=100000pa; equal and opposite free-stream speed U; I don't know to use which solver? How to simulate it? Thank you Best regards Jianying

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Question on turbulent dispersion force in momentum	Emmery	FLUENT	0	December 12, 2007 11:31
Look for a paper about DNS of Mixing layer by lele	leaf	Main CFD Forum	1	June 3, 2006 06:39
Turbulent Boundary Layer Reference	Erika Johnson	FLUENT	2	January 27, 2006 10:10
Validation of shear mixing layer using kwsst	Samuell	FLUENT	0	September 9, 2003 23:27
Grid for turbulent mixing layers	Jason	Main CFD Forum	1	March 11, 2000 22:56

April 3, 2009, 04:59		#2
wizard1301 New Member Antonio Attili Join Date: Mar 2009 Location: Rome, Italy Posts: 21 Rep Power: 17	You could use rhoTurbFoam or coodles the first for RANS, the second for LES modelling. These are compressible solvers, probably you can use incompressible solvers if your Mach number is low. Bye Antonio

April 3, 2009, 11:08		#3
JJY New Member Jianying Jiao Join Date: Mar 2009 Posts: 3 Rep Power: 17	Hi Antonio Thank you for your answer. How do I set initial velocity and other conditions? Are they like conditions of channelOodles? Thank you Jianying

April 3, 2009, 12:14		#4
wizard1301 New Member Antonio Attili Join Date: Mar 2009 Location: Rome, Italy Posts: 21 Rep Power: 17	Hi Jianying You should start with one of the tutorial that you can find in the user/run/tutorial folder. Try with the coodles tutorial (it's a simple step with imposed inlet velocity) and try to change boundary condition; then try to change geometry, modifying the blockMeshDict in the costant directory of the tutorial/coodles dir and running the blockMesh utility. In the userguide you can find a step by step guide to do something similar for the cavity tutorial. Antonio

April 3, 2009, 12:25		#5
JJY New Member Jianying Jiao Join Date: Mar 2009 Posts: 3 Rep Power: 17	Hi Antonio Thank you for your answer. I will try it . Jianying